ADVU-40-15-P-A Festo
Σχετικά προϊόντα
The Festo DFM-20-50-P-A-GF is a double-acting guided actuator with a 20 mm piston diameter and a 50 mm stroke length. It features a sliding guide for precise load handling and elastic cushioning rings at both ends to minimize impact. Operating within a pressure range of 2 to 10 bar, this actuator is suitable for various industrial applications requiring reliable and efficient linear motion.
The Festo DGS-16-140-P-A is a double-acting round cylinder with a 16 mm piston diameter and a 140 mm stroke length. It features flexible cushioning rings at both ends and operates within a pressure range of 1 to 10 bar.
The Festo ADVC-20-25-I-P-A is a compact double-acting short-stroke cylinder designed for precise linear motion applications. It features a 20 mm piston diameter and a 25 mm stroke length, making it ideal for space-constrained environments.
The Festo DZF-50-80-A-P-A is a double-acting flat cylinder with a 50 mm piston diameter and an 80 mm stroke length. It features elastic cushioning rings at both ends, ensuring smooth operation. The cylinder is designed for non-rotating applications and supports position sensing via proximity sensors. It operates within a pressure range of 1 to 10 bar and is suitable for various mounting positions.
The Festo DSBC-32-150-PPVA-N3 is a double-acting pneumatic cylinder with a 32 mm piston diameter and a 150 mm stroke length. It features adjustable pneumatic cushioning at both ends and conforms to ISO 15552 standards.
Λεπτομερής περιγραφή του προϊόντος
Βιομηχανικό εξάρτημα ADVU-40-15-P-A Festo για το αντίστοιχο βιομηχανικό ή αυτοματοποιημένο συγκρότημα.
Τύπος: Βιομηχανικό εξάρτημα
Πριν από την παραγγελία, ελέγξτε την ονομασία, τις διαστάσεις και τη συμβατότητα με τον κατασκευαστή και το συγκεκριμένο συγκρότημα.
Πρόσθετες παράμετροι
| Κατηγορία: | Πνευματικά εξαρτήματα |
|---|---|
| Βάρος: | 0.521 kg |
The Festo QSRL-1/2-12 is a rotatable push-in L-fitting designed for pneumatic systems. It features a 7.4 mm nominal size and connects to a 12 mm tube with a 1/2" male NPT thread. This fitting allows for flexible installation and efficient airflow management.
The Festo DSBC-Q-32-125-PPVA is a double-acting pneumatic cylinder with a 32 mm piston diameter and a 125 mm stroke length. It features adjustable pneumatic cushioning at both ends, ensuring smooth operation and adaptability to varying loads and speeds. This cylinder conforms to ISO 15552 standards, making it suitable for a wide range of industrial applications.
The Festo LFR-1/4-DB-7-MINI-KC is a compact air preparation combination unit designed for efficient filtration and pressure regulation in pneumatic systems. It features a 40 µm filter, manual actuation, and a maximum operating pressure of 10 bar.
The Festo DSBC-32-70-PPVA-N3 is a double-acting pneumatic cylinder with a 32 mm piston diameter and a 70 mm stroke length. It features adjustable pneumatic cushioning at both ends and conforms to ISO 15552 standards.
The Festo CPE18-M1H-5J-QS-8 is a compact 5/2 double solenoid valve designed for efficient control in pneumatic systems. With a width of just 18 mm, it offers a standard nominal flow rate of 850 l/min and operates within a pressure range of 2 to 10 bar. This valve is suitable for applications requiring precise and reliable switching in confined spaces.
Αξιολόγηση προϊόντος
Γίνετε ο πρώτος που θα δημοσιεύσει ένα άρθρο σε αυτό το στοιχείο!
Συζήτηση
Γίνετε ο πρώτος που θα δημοσιεύσει ένα άρθρο σε αυτό το στοιχείο!
Μόνο οι εγγεγραμμένοι χρήστες μπορούν να υποβάλλουν δημοσιεύσεις. Παρακαλούμε συνδεθείτε ή εγγραφείτε.
Μπορούμε να εξασφαλίσουμε την προμήθεια σχεδόν οποιουδήποτε προϊόντος της μάρκας Festo, ακόμη κι αν δεν περιλαμβάνεται αυτή τη στιγμή στον κατάλογό μας.
Στείλτε μας τον κωδικό, φωτογραφία της πινακίδας, τις διαστάσεις ή περιγραφή της εφαρμογής και θα ελέγξουμε τη διαθεσιμότητα.
Festo – ταυτοποίηση και προμήθεια προϊόντος
Η ονομασία Festo μπορεί να εμφανίζεται σε διαφορετικά τεχνικά προϊόντα και ανταλλακτικά. Για την αξιόπιστη ταυτοποίηση του ακριβούς είδους βασιζόμαστε, επομένως, στην πλήρη σήμανση και στα διαθέσιμα τεχνικά στοιχεία.
Το ακριβές προϊόν πρέπει να επιλέγεται με βάση την πλήρη σήμανση και τις τεχνικές παραμέτρους. Οι διαστάσεις, η κατασκευή, το υλικό και οι συνθήκες λειτουργίας είναι σημαντικά για την εύρεση κατάλληλου ανταλλακτικού.
Για ακριβή προσφορά, στείλτε μας την πλήρη σήμανση, την απαιτούμενη ποσότητα και κάθε διαθέσιμη τεκμηρίωση. Θα συγκρίνουμε τις προδιαγραφές και θα ελέγξουμε κατάλληλη δυνατότητα παράδοσης.
| Κατασκευαστική εταιρεία : | Festo SE & Co. KG |
|---|---|
| Διεύθυνση : | Festo Campus 1, 73734 Esslingen, Germany |
| Διεύθυνση ηλεκτρονικού ταχυδρομείου : | info_de@festo.com |