Komponenta - CPE10-M1BH-3OL-QS-6 Festo
Sorodni izdelki
Podroben opis izdelka
The Festo CPE10-M1BH-3OL-QS-6 is a high-performance 3/2 normally open solenoid valve engineered for precise control in pneumatic applications. Its compact design and robust features make it ideal for integration into various automation systems.
Technical Specifications:
- Valve Function: 3/2, open, monostable
- Actuation Type: Electrical
- Width: 10 mm
- Standard Nominal Flow Rate: 300 l/min
- Operating Voltage: 24 V DC
- Operating Pressure: 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar)
- Structural Design: Piston gate valve
- Reset Method: Pneumatic spring
- Degree of Protection: IP65
- Nominal Width: 4 mm
- Sealing Principle: Soft
- Mounting Position: Any
- Manual Override: Detenting via accessory, non-detenting
- Type of Control: Pilot-controlled
- Pilot Air Supply Port: Internal
- Flow Direction: Non-reversible
- Valve Position Indicator: Label holder
- Lap: Overlap
- Switching Time (Off): 14 ms
- Switching Time (On): 14 ms
- Duty Cycle: 100% in combination with holding current reduction
- Max. Positive Test Pulse with 0 Signal: 1200 µs
- Max. Negative Test Pulse on 1 Signal: 900 µs
- Coil Characteristics: 24 V DC: 1.28 W
- Permissible Voltage Fluctuations: -15% / +10%
- Operating Medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
- Operating and Pilot Media: Operation with oil lubrication possible (required for further use)
- Vibration Resistance: Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Shock Resistance: Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Corrosion Resistance Class (CRC): 2 - Moderate corrosion stress
- LABS (PWIS) Conformity: VDMA24364-B1/B2-L
- Temperature of Medium: -5°C to 50°C
- Ambient Temperature: -5°C to 50°C
- Electrical Connection: 2-pin
- Type of Mounting: With through-hole
- Pilot Exhaust Air Port: 82 M3
- Pilot Air Port: 12 M3
- Pneumatic Connection 1: QS-6
- Pneumatic Connection 2: QS-6
- Pneumatic Connection 3: M7
- Note on Materials: RoHS-compliant
- Seals Material: NBR
- Housing Material: Die-cast aluminum
This solenoid valve is designed for applications requiring precise control of compressed air, offering high flow rates and durability in a compact form factor. Its robust construction and compliance with international standards make it a reliable choice for various industrial automation systems.
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
Prispevke lahko oddajajo samo registrirani uporabniki. Prosimo, da se prijavite na ali prijavite na.
Zagotovimo lahko dobavo skoraj vsakega izdelka znamke Festo, tudi če trenutno ni naveden v našem katalogu.
Pošljite nam oznako, fotografijo napisne ploščice, mere ali opis uporabe in preverili bomo dobavljivost.
Festo – identifikacija izdelka in dobava
Oznaka Festo se lahko pojavlja na različnih tehničnih izdelkih in nadomestnih delih. Za zanesljivo določitev konkretnega izdelka zato izhajamo iz celotne oznake in razpoložljivih tehničnih podatkov.
Natančen izdelek je treba izbrati po celotni oznaki in tehničnih parametrih. Pri iskanju ustrezne zamenjave so pomembni mere, izvedba, material in obratovalni pogoji.
Za natančno ponudbo nam pošljite celotno oznako, zahtevano količino in razpoložljivo dokumentacijo. Primerjali bomo specifikacijo in preverili ustrezno možnost dobave.
| Proizvodno podjetje : | Festo SE & Co. KG |
|---|---|
| Naslov : | Festo Campus 1, 73734 Esslingen, Germany |
| E-naslov : | info_de@festo.com |