Komponenta - GRLA-1/8-QS-6-RS-D Festo
Srodni proizvodi
Detaljan opis proizvoda
POPIS V ANGLIČTINě
GRLA-1/8-QS-6-RS-D Festo One-way flow control valve
About the Range
Connection M3, M5, G 1/8, G 1/4, G 3/8, G 1/2, also available with NPT thread
Plug connector 3, 4, 6, 8, 10, 12 mm
Flow rate 0 ... 1,400 l/min
Non-return and flow control valve.
| Property | No |
| Product Type | Festo GRxA GRxZ |
| Short type code | GRLA |
| Valve Function | One-way flow control function for exhaust air |
| Mounting | Threaded |
| Adjusting element | Knurled screw |
| Ambient temp | -10 - 60 °C |
| Assembly position | Any |
| Authorisation | Germanischer Lloyd |
| Explosion protection | Zone 1 (ATEX) |
| Explosion protection | Zone 2 (ATEX) |
| Explosion protection | Zone 21 (ATEX) |
| Explosion protection | Zone 22 (ATEX) |
| Materials information for screw-in stud | Wrought Aluminium alloy |
| Materials information for seals | NBR |
| Materials note | Free of copper and PTFE |
| Max. tightening torque | 5 Nm |
| Medium temperature | -10 - 60 °C |
| Operating medium | Filtered, lubricated compressed air, 40 µm filtration |
| Operating medium | Filtered, unlubricated compressed air, 40 µm filtration |
| Operating Pressure | 0.2 - 10 bar |
| Pneumatic connection, port 1 | QS-6 |
| Pneumatic connection, port 2 | G1/8 |
| Product weight | 23 g |
| Regulating screw material data | High alloy steel, non-corrosive |
| Release ring material data | POM |
| Standard flow rate in blocked direction: 6 -> 0 bar | 330 - 390 l/min |
| Standard flow rate in direction of flow control: 6 -> 0 bar | 370 l/min |
| Standard nominal flow rate in flow control direction | 185 l/min |
| Standard nominal flow rate in non-return direction | 160 - 240 l/min |
| Swivel joint material data | Chromed |
| Swivel joint material data | Zinc die-casting |
Ocjena proizvoda
Budite prvi koji će objaviti članak na ovoj stavci!
Rasprava
Budite prvi koji će objaviti članak na ovoj stavci!
Samo registrirani korisnici mogu slati objave. Molimo prijavite se ili registrirajte.
Možemo nabaviti praktički bilo koji proizvod proizvođača Festo i pomoći pri odabiru odgovarajućeg rješenja za konkretnu primjenu.
Festo
Festo se povezuje s industrijskom automatizacijom, upravljanjem kretanjem i komponentama za strojne sklopove.
U praksi to mogu biti pneumatski elementi, linearne vodilice i drugi dijelovi povezani s preciznim gibanjem i upravljanjem.
Pri odabiru treba provjeriti dimenzije, priključke, radni medij i tražene radne parametre.
| Proizvodna tvrtka : | Festo |
|---|