Компонента - CPE10-M1BH-3OL-QS-6 Festo
Povezani proizvodi
Detaljan opis proizvoda
The Festo CPE10-M1BH-3OL-QS-6 is a high-performance 3/2 normally open solenoid valve engineered for precise control in pneumatic applications. Its compact design and robust features make it ideal for integration into various automation systems.
Technical Specifications:
- Valve Function: 3/2, open, monostable
- Actuation Type: Electrical
- Width: 10 mm
- Standard Nominal Flow Rate: 300 l/min
- Operating Voltage: 24 V DC
- Operating Pressure: 0.25 MPa to 0.8 MPa (2.5 bar to 8 bar)
- Structural Design: Piston gate valve
- Reset Method: Pneumatic spring
- Degree of Protection: IP65
- Nominal Width: 4 mm
- Sealing Principle: Soft
- Mounting Position: Any
- Manual Override: Detenting via accessory, non-detenting
- Type of Control: Pilot-controlled
- Pilot Air Supply Port: Internal
- Flow Direction: Non-reversible
- Valve Position Indicator: Label holder
- Lap: Overlap
- Switching Time (Off): 14 ms
- Switching Time (On): 14 ms
- Duty Cycle: 100% in combination with holding current reduction
- Max. Positive Test Pulse with 0 Signal: 1200 µs
- Max. Negative Test Pulse on 1 Signal: 900 µs
- Coil Characteristics: 24 V DC: 1.28 W
- Permissible Voltage Fluctuations: -15% / +10%
- Operating Medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
- Operating and Pilot Media: Operation with oil lubrication possible (required for further use)
- Vibration Resistance: Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Shock Resistance: Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Corrosion Resistance Class (CRC): 2 - Moderate corrosion stress
- LABS (PWIS) Conformity: VDMA24364-B1/B2-L
- Temperature of Medium: -5°C to 50°C
- Ambient Temperature: -5°C to 50°C
- Electrical Connection: 2-pin
- Type of Mounting: With through-hole
- Pilot Exhaust Air Port: 82 M3
- Pilot Air Port: 12 M3
- Pneumatic Connection 1: QS-6
- Pneumatic Connection 2: QS-6
- Pneumatic Connection 3: M7
- Note on Materials: RoHS-compliant
- Seals Material: NBR
- Housing Material: Die-cast aluminum
This solenoid valve is designed for applications requiring precise control of compressed air, offering high flow rates and durability in a compact form factor. Its robust construction and compliance with international standards make it a reliable choice for various industrial automation systems.
Ocena proizvoda
Budite prvi koji će objaviti članak za ovu stavku!
Diskusija
Budite prvi koji će objaviti članak za ovu stavku!
Samo registrovani korisnici mogu objavljivati postove. Molimo vas prijavite se ili registrujte.
Možemo da obezbedimo praktično bilo koji proizvod proizvođača Festo i pomognemo pri izboru odgovarajućeg rešenja za konkretnu primenu.
Festo
Festo se povezuje sa industrijskom automatizacijom, upravljanjem kretanjem i komponentama za mašinske sklopove.
U praksi to mogu biti pneumatski elementi, linearne vođice i drugi delovi povezani sa preciznim kretanjem i upravljanjem.
Pri izboru treba proveriti dimenzije, priključke, radni medijum i tražene radne parametre.
| Proizvođačka kompanija : | Festo |
|---|