Komponenta - GRLA-1/8-QS-6-RS-D Festo
Povezani proizvodi
Detaljan opis proizvoda
POPIS V ANGLIČTINě
GRLA-1/8-QS-6-RS-D Festo One-way flow control valve
About the Range
Connection M3, M5, G 1/8, G 1/4, G 3/8, G 1/2, also available with NPT thread
Plug connector 3, 4, 6, 8, 10, 12 mm
Flow rate 0 ... 1,400 l/min
Non-return and flow control valve.
| Property | No |
| Product Type | Festo GRxA GRxZ |
| Short type code | GRLA |
| Valve Function | One-way flow control function for exhaust air |
| Mounting | Threaded |
| Adjusting element | Knurled screw |
| Ambient temp | -10 - 60 °C |
| Assembly position | Any |
| Authorisation | Germanischer Lloyd |
| Explosion protection | Zone 1 (ATEX) |
| Explosion protection | Zone 2 (ATEX) |
| Explosion protection | Zone 21 (ATEX) |
| Explosion protection | Zone 22 (ATEX) |
| Materials information for screw-in stud | Wrought Aluminium alloy |
| Materials information for seals | NBR |
| Materials note | Free of copper and PTFE |
| Max. tightening torque | 5 Nm |
| Medium temperature | -10 - 60 °C |
| Operating medium | Filtered, lubricated compressed air, 40 µm filtration |
| Operating medium | Filtered, unlubricated compressed air, 40 µm filtration |
| Operating Pressure | 0.2 - 10 bar |
| Pneumatic connection, port 1 | QS-6 |
| Pneumatic connection, port 2 | G1/8 |
| Product weight | 23 g |
| Regulating screw material data | High alloy steel, non-corrosive |
| Release ring material data | POM |
| Standard flow rate in blocked direction: 6 -> 0 bar | 330 - 390 l/min |
| Standard flow rate in direction of flow control: 6 -> 0 bar | 370 l/min |
| Standard nominal flow rate in flow control direction | 185 l/min |
| Standard nominal flow rate in non-return direction | 160 - 240 l/min |
| Swivel joint material data | Chromed |
| Swivel joint material data | Zinc die-casting |
Ocena proizvoda
Budite prvi koji će objaviti članak za ovu stavku!
Diskusija
Budite prvi koji će objaviti članak za ovu stavku!
Samo registrovani korisnici mogu objavljivati postove. Molimo vas prijavite se ili registrujte.
Možemo da obezbedimo praktično bilo koji proizvod proizvođača Festo i pomognemo pri izboru odgovarajućeg rešenja za konkretnu primenu.
Festo
Festo se povezuje sa industrijskom automatizacijom, upravljanjem kretanjem i komponentama za mašinske sklopove.
U praksi to mogu biti pneumatski elementi, linearne vođice i drugi delovi povezani sa preciznim kretanjem i upravljanjem.
Pri izboru treba proveriti dimenzije, priključke, radni medijum i tražene radne parametre.
| Proizvođačka kompanija : | Festo |
|---|