Komponenta - QST-M5-4 Festo
Srodni proizvodi
The Festo DSBC-32-150-PPVA-N3 is a double-acting pneumatic cylinder with a 32 mm piston diameter and a 150 mm stroke length. It features adjustable pneumatic cushioning at both ends and conforms to ISO 15552 standards.
The Festo VPPM-8L-L-1-G14-0L10H-V1P-S1C1 is a proportional pressure regulator designed for precise control of compressed air systems. It features a G1/4 threaded connection and operates within a pressure regulation range of 0.1 to 10 bar. This model is suitable for applications requiring accurate pressure control and high flow rates.
The Festo CPE14-M1BH-5/3GS-QS-6 is a compact 5/3-way solenoid valve designed for efficient control in pneumatic systems. With a width of just 14 mm, it offers a standard nominal flow rate of 410 l/min and operates within a pressure range of -0.09 MPa to 1 MPa. This valve features a mechanical spring reset and is suitable for applications requiring a closed valve function.
The Festo DSBC-32-70-PPVA-N3 is a double-acting pneumatic cylinder with a 32 mm piston diameter and a 70 mm stroke length. It features adjustable pneumatic cushioning at both ends and conforms to ISO 15552 standards.
The Festo CPE10-M1BH-3OL-QS-6 is a compact 3/2 normally open solenoid valve designed for efficient control of compressed air systems. With a width of just 10 mm, it offers high flow rates and precise control in a space-saving design.
Detaljan opis proizvoda
Nema dostupnog opisa proizvoda
The Festo VUVS-L30-B52-D-G38-F8 is a 5/2 double solenoid valve designed for controlling pneumatic actuators in automation systems.
Ocjena proizvoda
Budite prvi koji će objaviti članak na ovoj stavci!
Rasprava
Budite prvi koji će objaviti članak na ovoj stavci!
Samo registrirani korisnici mogu slati objave. Molimo prijavite se ili registrirajte.
Možemo nabaviti praktički bilo koji proizvod proizvođača Festo i pomoći pri odabiru odgovarajućeg rješenja za konkretnu primjenu.
Festo
Festo se povezuje s industrijskom automatizacijom, upravljanjem kretanjem i komponentama za strojne sklopove.
U praksi to mogu biti pneumatski elementi, linearne vodilice i drugi dijelovi povezani s preciznim gibanjem i upravljanjem.
Pri odabiru treba provjeriti dimenzije, priključke, radni medij i tražene radne parametre.
| Proizvodna tvrtka : | Festo |
|---|