Needle cages
Needle cages hold the needles in the correct position and enable compact storage with high load capacity. They are used in transmissions, lever mechanisms, engines and other space-constrained assemblies.
When choosing, the inner diameter, outer diameter, width, number of needles and design of the cage are decisive. The quality of the shaft or ring on which the needles run is also important.
- measure the inside and outside diameter of the cage
- verify the width and number of needles
- check if the cage works with the inner ring or directly on the shaft
- do not overlook lubrication and cleanliness of the work area
Produktsortering
80 elementer i alt
Mærker
80 elementer, der skal vises
Produktliste
€12,26 ekskl. moms
€14,84
/ stk.
Dimensions of the bearing: 40×45×27 mm (inner diameter × outer diameter × width)
K = tapered bore 1:12.
K = tapered bore 1:12.
€2,45 ekskl. moms
€2,97
/ stk.
Dimensions of the bearing: 30×35×20 mm (inner diameter × outer diameter × width)
K = tapered bore 1:12.
K = tapered bore 1:12.
€12,44 ekskl. moms
€15,05
/ stk.
Dimensions of the bearing: 35×45×20 mm (inner diameter × outer diameter × width)
K = tapered bore 1:12.
K = tapered bore 1:12.
€5,62 ekskl. moms
€6,80
/ stk.
Dimensions of the bearing: 25×30×20 mm (inner diameter × outer diameter × width)
K = tapered bore 1:12.
K = tapered bore 1:12.
€3,37 ekskl. moms
€4,08
/ stk.
Dimensions of the bearing: 40×45×17 mm (inner diameter × outer diameter × width)
K = tapered bore 1:12.
K = tapered bore 1:12.
€0,79 ekskl. moms
€0,95
/ stk.
Dimensions of the bearing: 20×26×17 mm (inner diameter × outer diameter × width)
K = tapered bore 1:12.
K = tapered bore 1:12.
€4,40 ekskl. moms
€5,32
/ stk.
Dimensions of the bearing: 25×35×25 mm (inner diameter × outer diameter × width)
K = tapered bore 1:12.
K = tapered bore 1:12.
€17,14 ekskl. moms
€20,74
/ stk.
Dimensions of the bearing: 28×34×17 mm (inner diameter × outer diameter × width)
K = tapered bore 1:12.
K = tapered bore 1:12.
€3,37 ekskl. moms
€4,08
/ stk.
Dimensions of the bearing: 35×40×13 mm (inner diameter × outer diameter × width)
K = tapered bore 1:12.
K = tapered bore 1:12.
€3,37 ekskl. moms
€4,08
/ stk.
Dimensions of the bearing: 18×22×17 mm (inner diameter × outer diameter × width)
K = tapered bore 1:12.
K = tapered bore 1:12.
€9,50 ekskl. moms
€11,50
/ stk.
Dimensions of the bearing: 40×45×20 mm (inner diameter × outer diameter × width)
K = tapered bore 1:12.
K = tapered bore 1:12.
€3,37 ekskl. moms
€4,08
/ stk.
Dimensions of the bearing: 15×19×13 mm (inner diameter × outer diameter × width)
K = tapered bore 1:12.
K = tapered bore 1:12.
€5,42 ekskl. moms
€6,56
/ stk.
Dimensions of the bearing: 55×60×30 mm (inner diameter × outer diameter × width)
K = tapered bore 1:12.
K = tapered bore 1:12.
For the needle cage, send the dimensions and a photo of the storage. If the inner ring is missing, it is necessary to check the hardness and surface of the shaft.