FAG
We can arrange delivery of almost any FAG product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
FAG – product identification and supply
The FAG designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
Bearing - 6202 2RS FAG
15 × 35 × 11 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Check the complete designation and application suitability.
Bearing - 6202 C 2Z FAG
15 × 35 × 11 mm. Single-row deep-groove ball bearing. Metal shields on both sides; compare the complete designation, including suffixes.
Bearing - 6206 FAG
30 × 62 × 16 mm. bearing with clearly stated mounting dimensions. The product name gives no suffix for closure or clearance; compare the complete marking on the original bearing before replacement.
Bearing - 6002 2RS FAG
15 × 32 × 9 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 6208 2RSR FAG
40 × 80 × 18 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 7207 B TVP UA FAG
35 × 72 × 17 mm. single-row angular contact ball bearing with a 40° contact angle for combined radial and axial loads acting in one direction. The UA version is universally matchable and produces a small axial internal clearance in a bearing set.
Bearing - 6005 2RSR FAG
25 × 47 × 12 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 6201 C 2Z FAG
12 × 32 × 10 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions. The FAG Generation C design is optimised for low friction and quiet running.
Bearing - 3004 2RS C3 FAG
Rubber seals on both sides 20 × 42 × 16 mm double-row angular contact ball bearing for combined radial and axial loads in both directions. The C3 version has greater axial internal clearance than standard CN.
Bearing - 3803 2Z P6 FAG
Metal shields on both sides double-row angular contact ball bearing, 17 × 26 × 7 mm. P6 accuracy for more precise, smoother running; the compact design carries combined loads and axial forces in both directions.
Bearing - 6202 2Z FAG
15 × 35 × 11 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against FAG documentation and the requirements of the specific application. Metal shields on both sides.
Bearing - 626 2Z FAG
6 × 19 × 6 mm. is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds. The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.
Bearing - 6205 2Z FAG
25 × 52 × 15 mm. Metal shields on both sides. Versatile FAG single-row deep groove ball bearing with non-contact shielding.
Bearing - 6202 C3 FAG
15 × 35 × 11 mm. Greater C3 radial internal clearance. FAG single-row deep groove ball bearing for arrangements requiring increased internal clearance.
Bearing - 6009 2Z FAG
45 × 75 × 16 mm. FAG single-row deep groove ball bearing with metal shields on both sides (2Z).
Bearing - B7204 C T P4S UL FAG
20 × 47 × 14 mm. FAG B7204-C-T-P4S-UL super-precision spindle bearing with a 15° contact angle, textile-phenolic cage and universal matching for light preload. Designed for precise high-speed spindle arrangements.
Bearing - 6201 2RSR FAG
12 × 32 × 10 mm. Single-row FAG 6201-2RSR deep groove ball bearing with seals on both sides and a sheet-steel cage. A versatile design for radial loads and axial loads in both directions.