URB
We can arrange delivery of almost any URB product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
URB – product identification and supply
The URB designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
Bearing - 6001 URB
12 × 28 × 8 mm. single-row open deep groove ball bearing for radial and axial loads in both directions. Dynamic load rating 5.1 kN, mass 0.022 kg.
Bearing - 30224 A URB
120 × 215 × 43.5 mm. tapered roller bearing is a robust single-row bearing for high radial loads combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently. For a correct replacement, compare the complete designation including suffix A, the dimensions and required clearance with the original part.
Bearing - UC 210 URB
50 × 90 × 51.6 mm. URB bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - NU 2205 URB
25 × 52 × 18 mm. single-row cylindrical roller bearing is a separable bearing for high radial loads. The NU design has two integral flanges on the outer ring and a flangeless inner ring, allowing axial displacement of the shaft relative to the housing in both directions.
Bearing - 51201 URB
12 × 28 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 51102 URB
15 × 28 × 9 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - NJ 307 URB
35 × 80 × 21 mm. single-row cylindrical roller bearing is designed for high radial loads and can also locate the shaft axially in one direction. Its separable construction allows the inner ring to be installed independently of the outer ring and roller assembly.
Bearing - 31308 A URB
40 × 90 × 25.25 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 51226 M URB
Before ordering, compare the complete designation with the original part and confirm the design in the manufacturer documentation.
Bearing - 30230 A URB
150 × 270 × 49 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 1309 URB
45 × 100 × 25 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 32308 A URB
40 × 90 × 35.25 mm. bearing. Verify the complete designation and dimensions in manufacturer documentation before selection.
Bearing - NJ 208 FRB
40 × 80 × 18 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6014 2RS URB
70 × 110 × 20 mm. Rubber seals on both sides.
Bearing - 6015 M P6 URB
URB bearing 6015 M P6. Before ordering, compare the full designation and execution with the part used in your equipment.
Bearing - 6015 M C4 URB
URB bearing 6015 M C4. Before ordering, compare the full designation and execution with the part used in your equipment.
Bearing - 6015 M URB
URB bearing 6015 M. Before ordering, compare the full designation and execution with the part used in your equipment.