NACHI

Bearing - 628 NACHI

8 × 24 × 8 mm. Open single-row 628 deep-groove ball bearing for accurate support of small shafts and rotating mechanisms. It carries radial load and limited axial load in both directions.

Bearing - 6214 2RS NACHI

70 × 125 × 24 mm. deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.

Bearing - 22209 KM NACHI

45 × 85 × 23 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

P 318 NACHI by NACHI: pillow block bearing housing.

UCP 316 Nachi by NACHI: pillow block bearing unit.

Dimensions according to drawing: Shaft diameter: 80 mm; L = 400 mm; J = 300 mm; H = 106 mm; A = 110 mm

Bearing - 0 10 NACHI

bearing with the verified designation. Compare the complete designation, dimensional data and design with the original part. Confirm suitability for the specific bearing arrangement in NACHI documentation.

Bearing - 7206 P NACHI

30 × 62 × 16 mm. Bearing.

Bearing - 6214 C3 NACHI

70 × 125 × 24 mm. Greater radial internal clearance.

Bearing - NU 336 MC3 P6 NACHI

Higher accuracy class P6 NACHI bearing with the complete designation.

Bearing - 6214 2NSL NACHI

70 × 125 × 24 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6201 2NSE NACHI

12 × 32 × 10 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6016 2Z NACHI

80 × 125 × 22 mm. Metal shields on both sides.

Bearing - 6219 2NS NACHI

95 × 170 × 32 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6011 2NSL NACHI

55 × 90 × 18 mm. Single-row deep-groove ball bearing with contact seals on both sides. Verify suitability by the complete designation and application. Bore diameter d = 55 mm, outside diameter D = 90 mm, width B = 18 mm.