TIMKEN
We can arrange delivery of almost any TIMKEN product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
TIMKEN – product identification and supply
The TIMKEN designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
Bearing - 6306 2RS TIMKEN
30 × 72 × 19 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Check the complete designation before ordering.
Bearing - 608 2RS TIMKEN
8 × 22 × 7 mm. single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.
Bearing - 6005 2RS TIMKEN
25 × 47 × 12 mm. single-row deep-groove ball bearing with rubber seals on both sides. A versatile design for radial and limited axial loads in both directions, protected against common contaminants.
Bearing - 6305 2RS TIMKEN
25 × 62 × 17 mm. single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
Bearing - 6306 2Z TIMKEN
30 × 72 × 19 mm. is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds. The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.
Bearing - 6002 2RS TIMKEN
15 × 32 × 9 mm. is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants. Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.
Bearing - 6208 2RS TIMKEN
40 × 80 × 18 mm. The deep-groove ball bearing is a single-row radial bearing with contact rubber seals on both sides. The seals help retain grease and protect the raceways from common dust and moisture. A versatile choice for electric motors, pumps, fans, gearboxes, conveyors and agricultural machinery. It supports radial loads and moderate axial forces in both directions.
K = tapered bore 1:12.
Bearing - 16150 16284 TIMKEN
38.1 × 72.238 × 20.638 mm. TIMKEN bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - LM300811/LM300849 TIMKEN
40.988 × 67.975 × 17.501 mm. single-row tapered roller bearing set consists of the LM300849 inner cone and the LM300811 outer cup. This imperial-series design carries radial load together with axial load in one direction.
Bearing - 6007 2RS TIMKEN
35 × 62 × 14 mm. Rubber seals on both sides.
Bearing - 30206 TIMKEN
30 × 62 × 17.25 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6304 2RS TIMKEN
20 × 52 × 15 mm. Rubber seals on both sides.
Bearing - EE134100-30000 + 134143-30000 TIMKEN
EE134100 / 134143 TIMKEN TIMKEN rolling bearing for industrial use. Use only when designation, dimensions and design match the original part.
Bearing - EE128112/128160 TIMKEN
280 × 406.4 × 67.67 mm. Timken single-row tapered roller bearing in an open design for combined radial and axial loads.
