Bearing sleeve - H 3036 SKF

Not rated Rating details
€128,66 / pcs €106,33 excl. VAT Measure price:
Available to order – we will confirm availability
Delivery to:
30. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€128,66 / pcs
5 - 9 pcs = discount 3 %
€124,80 / pcs
10 - 24 pcs = discount 6 %
€120,94 / pcs
25 - 49 pcs = discount 9 %
€117,08 / pcs
50 and more pcs = discount 12 %
€113,22 / pcs
You save €0

H 3036 SKF is an adapter sleeve for mounting a tapered-bore bearing on a cylindrical shaft of 160 mm diameter. The sleeve length is 109 mm. It forms the mounting connection between the shaft and bearing inner ring.

Detailed information

Product detailed description

H 3036 SKF is an adapter sleeve for mounting a tapered-bore bearing on a cylindrical shaft of 160 mm diameter. The sleeve length is 109 mm. It forms the mounting connection between the shaft and bearing inner ring.

Verified dimensions

  • Shaft diameter d₁: 160 mm
  • Nominal bearing bore d: 180 mm
  • Sleeve length B₁: 109 mm
  • Outside diameter over nut d₃: 210 mm
  • Width of nut and locking device B₄: 29.5 mm
  • Thread G: M180×3
  • Locknut: KML 36
  • Lockwasher: MBL 36
  • Taper: 1:12

Shaft diameter and nominal bearing bore are different dimensions. The cylindrical inside surface seats on the shaft; the external taper receives the bearing. The outside dimension over the nut is not the bearing outside diameter. Do not select a replacement from one dimension alone. Sleeve length is also different from bearing width.

When ordering, retain the full H30 series designation. An H31 sleeve for the same shaft diameter is not automatically a replacement; also check sleeve length, bearing position and the available mounting space in the assembly.

How the adapter works

Tightening the locknut drives the bearing along the taper and clamps the sleeve onto the shaft. This is an H-series adapter sleeve; AH withdrawal sleeves use a different mounting arrangement and are not interchangeable simply because their bores match. The sleeve is not a plain bearing and contains no raceways or rolling elements.

Mounting and clearance checks

Clean the shaft and mating surfaces, inspect the thread and check the complete bearing designation, including its tapered-bore version. Drive-up affects internal bearing clearance, so verify the final setting by the method prescribed for that bearing. The sleeve designation alone does not determine a universal tightening torque or number of nut turns. Allow axial space for the nut and access for mounting tools.

Nut and locking

SKF lists H 3036 as the sleeve complete with locknut KML 36 and lockwasher MBL 36. The nut drives up and locates the bearing; the washer prevents the nut from loosening. Apply the locking after achieving the correct mounting setting. The bearing itself is a separate component; its performance data are not sleeve specifications.

Maintenance and replacement

Before remounting, inspect taper, shaft seat, thread and locking components. Replacing the sleeve does not repair a worn shaft or damaged bearing inner ring. Lubricant, relubrication interval, speed and load capacity depend on the complete bearing arrangement. Bearing lubrication is separate from preparing the mounting contact surfaces. Complete the specified nut locking before operation.

Additional parameters

Category: Adapter sleeves
Weight: 7.18 kg
EAN: 7316577008923
Shaft diameter (mm): 160
Shaft diameter d₁: 160 mm
Nominal bearing bore d: 180 mm
Sleeve length B₁: 109 mm
Outside diameter over nut d₃: 210 mm
Width of nut and locking device B₄: 29.5 mm
Thread G: M180×3
Locknut: KML 36
Lockwasher: MBL 36
Taper: 1:12

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any SKF product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about SKF products

SKF – Product range and selection

The SKF range includes, for example: ball bearings, cylindrical and spherical roller bearings, seals, lubrication systems.

Examples from our catalogue

  • S 7014 CDGA P4A SKF
  • 6303 2RSH SKF
  • 22234 CC/W33 SKF

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.

Choose SKF bearings by the full designation and the requirements of the bearing arrangement. Preserve every suffix when searching for an exact item.

Check the details behind the designation

Compare bearing type, bore, outside diameter and width, followed by the specified clearance, sealing and precision. For a housing component or bushing, also identify the assembly and mounting.

What should a quotation request include?

Send the full designation, quantity and application. If the marking is incomplete, include dimensions and photographs of both sides. Availability and any replacement will be checked for the specific item.

Request a SKF quotation · Select bearings by designation or size

Availability and any replacement will be confirmed for the specific item.

Manufacturing company : AB SKF (publ)
Address : Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden
E-mail : skf.cz@skf.com