25 × 62 × 25.4 mm. double-row angular contact ball bearing in open design. A rigid, compact arrangement for combined radial and axial loads in both directions.
15 × 35 × 11 mm. single-row angular contact ball bearing for combined radial and axial loads. A single bearing carries axial load in one direction; a suitable paired arrangement is used when axial guidance is required in both directions.
35 × 72 × 17 mm. single-row angular contact ball bearing with a 40° contact angle for combined radial and axial loads acting in one direction. The UA version is universally matchable and produces a small axial internal clearance in a bearing set.
30 × 62 × 23 mm. double-row angular contact ball bearing for combined radial and axial loads in both directions. Its compact design provides rigid and accurate shaft guidance.
20 × 47 × 14 mm. FAG B7204-C-T-P4S-UL super-precision spindle bearing with a 15° contact angle, textile-phenolic cage and universal matching for light preload. Designed for precise high-speed spindle arrangements.
45 × 100 × 39.7 mm. double-row angular-contact ball bearing carries high radial loads together with axial forces in both directions. Two ball rows provide rigid axial location and the ability to support tilting moments in a compact unit. It suits positions where a single-row ball bearing does not provide sufficient axial capacity.
20 × 52 × 22 mm. Greater radial internal clearance. Double-row angular-contact ball bearing for rigid arrangements under combined loads. It carries radial load and axial loads in both directions; C3 clearance provides extra allowance where thermal expansion or tight fits reduce operating clearance.
60 × 110 × 22 mm. Higher accuracy class P6 Single-row angular-contact ball bearing for combined radial load and axial load in one direction. P6 accuracy is suitable for arrangements with higher requirements for dimensional and running accuracy.
40 × 90 × 34 mm. Double-row angular contact ball bearing for combined radial and axial loads in both directions. Its rigid, non-separable design provides accurate shaft guidance and can also accommodate tilting moments.
30 × 72 × 27 mm. Double-row angular contact ball bearing for combined radial and axial loads in both directions. This stocked item is specified with a width of 27 mm; compare it carefully with the original bearing before replacement.
