Ložiska-Polička.cz
Bearing - 608 Z ZKL
8 × 22 × 7 mm. Single-row deep-groove ball bearing with a non-contact metal shield on one side (Z). Check the complete designation and application suitability.
Bearing - 608 2Z SKF
8 × 22 × 7 mm. Single-row SKF bearing with non-contact metal shields on both sides (2Z) and normal radial clearance CN. Check the complete designation before ordering.
Bearing - 6001 2RS ZVL
12 × 28 × 8 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Check the complete designation and application suitability.
Bearing - 6202 2RS FAG
15 × 35 × 11 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Check the complete designation and application suitability.
Bearing - 6303 2RS ZVL
17 × 47 × 14 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Linear ball bearing - KSO20-PP INA
is an open self-aligning linear ball bearing designed for precise and smooth linear motion on a supported guide shaft with a diameter of 20 mm. The PP version is fitted with lip seals on both sides to help protect the internal components against contamination and retain lubricant. INA bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design….
The IKO Linear Way Carriage LWHT25C1BT1HS2 is a high-rigidity, maintenance-free linear guide component designed for precise and durable linear motion applications.
d 60 × H 69,8 × L 241 × J 184 × A 70 mm | N 20 × N1 23 mm
C-UCP 212 D1 NTN is a cast-iron pillow block unit with cast covers for a 60 mm shaft, a UC 212 D1 insert bearing, slinger seal and two set screws for shaft locking.
d = M65x2 mm,
D = 85 mm,
L = 50 mm,
b = 60 mm
Bearing - 22313 CC C3 W33 SKF
65 × 140 × 48 mm. Greater radial internal clearance. Lubrication groove and lubrication holes in the outer ring.
Dimensions: t = 28.6 mm, a = 44.6, b = 16 mm
Number of links = 26
To be attached to variable speed gear-box = 2
Transmission ratio = 1:4,5
Mass (kg) = 2.25
The OPTIBELT SPA 2382 is a metric V-belt designed for efficient power transmission in industrial applications. With a length of 2382 mm, width of 12.7 mm, and height of 10 mm, it ensures reliable performance across various machinery.
Bearing - 608 2Z NMB
8 × 22 × 7 mm. Single-row deep-groove ball bearing. Metal shields on both sides; compare the complete designation before ordering.
Bearing - 608 2RS ZKL
8 × 22 × 7 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Verify the complete designation before ordering.
Bearing - 6306 2RS TIMKEN
30 × 72 × 19 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Check the complete designation before ordering.
