Bearing sleeve - H 3138 SKF
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
SKF H 3138 is an adapter sleeve for mounting a tapered-bore bearing on a cylindrical shaft. It is intended for a 170 mm shaft; the nominal bearing bore is 190 mm and sleeve length B₁ is 141 mm.
Technical data
- Designation: H 3138 SKF
- Type: Adapter sleeve
- Shaft diameter d₁: 170 mm
- Nominal tapered bearing bore diameter d: 190 mm
- Nut outside diameter d₃: 240 mm
- Sleeve length B₁: 141 mm
- Width of nut and locking device B₄: 30.5 mm
- Thread G: M190×3
- Taper: 1:12
- Locknut: KM 38
- Lock washer: MB 38
- Locknut width B: 28 mm
- Oil injection holes: Without
- Associated hydraulic nut: HMV 38E
Dimensions and bearing association
Shaft diameter d₁ 170 mm and nominal tapered bearing bore d 190 mm are different dimensions. Nut outside diameter d₃ is 240 mm; this is not the bearing outside diameter. Length B₁ 141 mm belongs to the sleeve, not to the bearing width. The drawing also lists dimension B₄ 30.5 mm. Retain the complete bearing designation and check clearance for the nut in the actual arrangement.
How the adapter sleeve works
The cylindrical sleeve bore seats on the shaft, while the external taper carries a bearing with a matching tapered bore. Tightening the nut moves the inner ring along the taper and produces the required grip on the shaft. Bearing radial clearance changes at the same time. An adapter sleeve permits mounting on plain or stepped shafts; axial location and load transfer must be assessed for the complete arrangement.
Nut, washer and supply
For H 3138, the manufacturer lists nut KM 38 and washer MB 38. The nut is used for mounting and securing; the washer locks it after the correct setting has been achieved. Distinguish this set from a bare sleeve or another H-series length.
SKF lists hydraulic nut HMV 38E as an associated mounting tool. Distinguish it from locknut KM 38 and washer MB 38 supplied as the standard sleeve assembly. Using a hydraulic nut is different from injecting oil through the sleeve; H 3138 has no oil injection holes.
Mounting and clearance checks
Before mounting, check the cleanliness and condition of the shaft, taper, thread and bearing bore. Prepare contact surfaces and select the procedure according to the instructions for the fitted bearing. Drive the ring on evenly and apply mounting force without transmitting it through the rolling elements. Verify the fit using the specified method, for example radial clearance or axial displacement measurement appropriate to the bearing type. The sleeve designation alone does not establish a universal tightening torque or number of nut turns.
Dismounting and reuse
Release the locking device before loosening the nut. The bearing can move suddenly when the tapered joint releases; retain the specified stop and follow the mounting instructions. Dismounting force should pass through the appropriate ring or abutment. Before remounting, inspect threads, seating surfaces and locking parts; increased tightening is not a remedy for damaged components.
Difference from a withdrawal sleeve
An H-series adapter sleeve has its thread at the smaller end of the taper. AH, AHX and AOH withdrawal sleeves work differently and have the thread at the larger end. Matching shaft diameter alone therefore does not establish interchangeability.
Lubrication and operating data
The sleeve is a mounting component with no rolling elements or cage of its own. Determine permissible load, speed, operating clearance, sealing and lubrication for the fitted bearing and the complete arrangement. Mounting oil does not replace the bearing’s operating lubricant.
Additional parameters
| Category: | Adapter sleeves |
|---|---|
| Weight: | 11.1 kg |
| EAN: | 7316577009067 |
| Shaft diameter (mm): | 170 |
| Designation: | H 3138 SKF |
| Type: | Adapter sleeve |
| Shaft diameter d₁: | 170 mm |
| Nominal tapered bearing bore diameter d: | 190 mm |
| Nut outside diameter d₃: | 240 mm |
| Sleeve length B₁: | 141 mm |
| Width of nut and locking device B₄: | 30.5 mm |
| Thread G: | M190×3 |
| Taper: | 1:12 |
| Locknut: | KM 38 |
| Lock washer: | MB 38 |
| Locknut width B: | 28 mm |
| Oil injection holes: | Without |
| Associated hydraulic nut: | HMV 38E |
Product rating
Be the first who will post an article to this item!
We can source almost any SKF product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about SKF productsSKF – Product range and selection
The SKF range includes, for example: ball bearings, cylindrical and spherical roller bearings, seals, lubrication systems.
Examples from our catalogue
- S 7014 CDGA P4A SKF
- 6303 2RSH SKF
- 22234 CC/W33 SKF
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Choose SKF bearings by the full designation and the requirements of the bearing arrangement. Preserve every suffix when searching for an exact item.
Check the details behind the designation
Compare bearing type, bore, outside diameter and width, followed by the specified clearance, sealing and precision. For a housing component or bushing, also identify the assembly and mounting.
What should a quotation request include?
Send the full designation, quantity and application. If the marking is incomplete, include dimensions and photographs of both sides. Availability and any replacement will be checked for the specific item.
Request a SKF quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | AB SKF (publ) |
|---|---|
| Address : | Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden |
| E-mail : | skf.cz@skf.com |