Bearing sleeve - H209 ZKL
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
H209 ZKL is an adapter sleeve for mounting a tapered-bore bearing on a cylindrical shaft of 40 mm diameter. The sleeve length is 33 mm. It forms the mounting connection between the shaft and bearing inner ring.
Verified dimensions
- Shaft diameter d₀: 40 mm
- Nominal bearing bore d: 45 mm
- Sleeve length L: 33 mm
- Outside diameter over nut D: 65 mm
- Catalogue dimension a: 11 mm
- Thread d_z: M45×1.5
- Locknut: KM9
- Lockwasher: MB9
- Sleeve material: Steel
Shaft diameter and nominal bearing bore are different dimensions. The cylindrical inside surface seats on the shaft; the external taper receives the bearing. The outside dimension over the nut is not the bearing outside diameter. Do not select a replacement from one dimension alone. Sleeve length is also different from bearing width.
How the adapter works
Tightening the locknut drives the bearing along the taper and clamps the sleeve onto the shaft. This is an H-series adapter sleeve; AH withdrawal sleeves use a different mounting arrangement and are not interchangeable simply because their bores match. The sleeve is not a plain bearing and contains no raceways or rolling elements.
Mounting and clearance checks
Clean the shaft and mating surfaces, inspect the thread and check the complete bearing designation, including its tapered-bore version. Drive-up affects internal bearing clearance, so verify the final setting by the method prescribed for that bearing. The sleeve designation alone does not determine a universal tightening torque or number of nut turns. Allow axial space for the nut and access for mounting tools.
Nut and locking
ZKL lists H209 as the sleeve complete with locknut KM9 and lockwasher MB9. The nut drives up and locates the bearing; the washer prevents the nut from loosening. Apply the locking after achieving the correct mounting setting. The bearing itself is a separate component; its performance data are not sleeve specifications.
Maintenance and replacement
Before remounting, inspect taper, shaft seat, thread and locking components. Replacing the sleeve does not repair a worn shaft or damaged bearing inner ring. Lubricant, relubrication interval, speed and load capacity depend on the complete bearing arrangement. Bearing lubrication is separate from preparing the mounting contact surfaces. Complete the specified nut locking before operation.
Additional parameters
| Category: | Adapter sleeves |
|---|---|
| Weight: | 0.23 kg |
| Shaft diameter d₀: | 40 mm |
| Nominal bearing bore d: | 45 mm |
| Sleeve length L: | 33 mm |
| Outside diameter over nut D: | 65 mm |
| Catalogue dimension a: | 11 mm |
| Thread d_z: | M45×1.5 |
| Locknut: | KM9 |
| Lockwasher: | MB9 |
| Sleeve material: | Steel |
Product rating
Be the first who will post an article to this item!
We can source almost any ZKL product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about ZKL productsZKL – Product range and selection
The ZKL range includes, for example: ball bearings.
Examples from our catalogue
- B7016 AATB P5 OL ZKL
- 22206 EJA ZKL
- UCP212-36 ZKL
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
| Manufacturing company : | ZKL, a.s. |
|---|---|
| Address : | Jedovnická 2346/8, 628 00 Brno, Czech Republic |
| E-mail : | head@zkl.cz |