Bearing sleeve - H210 ZKL

Not rated Rating details
€8,16 / pcs €6,74 excl. VAT Measure price:
In stock (6 pcs)
Delivery to:
24. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€8,16 / pcs
5 - 9 pcs = discount 3 %
€7,92 / pcs
10 - 24 pcs = discount 6 %
€7,67 / pcs
25 - 49 pcs = discount 9 %
€7,43 / pcs
50 and more pcs = discount 12 %
€7,18 / pcs
You save €0

H210 ZKL: Mounting component for securing a tapered-bore bearing on a cylindrical shaft. H210 ZKL is an adapter sleeve, not a plain bearing. d = 50 mm; d₀ = 45 mm; L = 35 mm.

Detailed information

Product detailed description

H210 ZKL: Mounting component for securing a tapered-bore bearing on a cylindrical shaft. H210 ZKL is an adapter sleeve, not a plain bearing.

Product identification

  • Designation: H210
  • Manufacturer: ZKL
  • Component type: Adapter sleeve
  • Material: Steel
  • d₀: 45 mm
  • d: 50 mm
  • d_z: M50 × 1.5
  • D: 70 mm
  • L: 35 mm
  • a: 12 mm
  • Catalogue nut: KM10
  • Catalogue locking washer: MB10

Shaft diameter is 45 mm and nominal bearing bore 50 mm. Sleeve length is 35 mm. The 70 mm assembly outside dimension relates to the nut side, not bearing outside diameter. The 12 mm dimension is a separate axial drawing measurement, not bearing width.

ZKL lists H210 in its table of sleeves including nut and locking device. The associated components are KM10 and MB10. The nut drives the bearing onto the taper; the washer locks its position. Inspect both thread and locking component during maintenance.

Selecting the bearing and adjacent parts

ZKL describes adapter sleeves as steel components for mounting self-aligning ball and spherical roller bearings with tapered bores. The sleeve forms the connection between the cylindrical shaft and the tapered inner-ring bore. Select the bearing by its complete designation and mounting dimensions.

Mounting and bearing selection

Before mounting, check the shaft, tapered surfaces, thread and longitudinal slit. Driving the bearing up the taper affects both the fit and internal clearance. Follow the procedure and checking method specified for the bearing; nut tightening force alone does not confirm correct mounting.

Exact version identification

The H series differs in design and use from AH or AHX withdrawal sleeves. The same shaft diameter does not establish interchangeability. Compare the full designation, thread, length, matching nut and locking element. Dimensions of a similar version are no substitute for the drawing.

Servicing and remounting

During dismounting, also inspect the shaft and bearing seats. A new sleeve does not repair a damaged seating surface or a worn bearing. Restore the specified axial retention when reassembling. Load capacity, operating speed and lubrication of the complete arrangement depend on the selected bearing and service conditions, not on the sleeve alone.

Manufacturer technical documentation: ZKL (PDF)

Additional parameters

Category: Adapter sleeves
Weight: 0.276 kg
Component type: Adapter sleeve
Material: Steel
d₀: 45 mm
d: 50 mm
d_z: M50 × 1.5
D: 70 mm
L: 35 mm
a: 12 mm
Catalogue nut: KM10
Catalogue locking washer: MB10

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any ZKL product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about ZKL products

ZKL – Product range and selection

The ZKL range includes, for example: ball bearings.

Examples from our catalogue

  • B7016 AATB P5 OL ZKL
  • 22206 EJA ZKL
  • UCP212-36 ZKL

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.

Manufacturing company : ZKL, a.s.
Address : Jedovnická 2346/8, 628 00 Brno, Czech Republic
E-mail : head@zkl.cz