Bearing sleeve - H211 STEYR
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
H211 STEYR: Mounting component for securing a tapered-bore bearing on a cylindrical shaft. H211 STEYR is an adapter sleeve, not a plain bearing.
Product identification
- Designation: H211
- Manufacturer: STEYR
- Component type: Adapter sleeve
The sleeve forms the connection between the cylindrical shaft and the tapered inner-ring bore. Select the bearing by its complete designation and mounting dimensions.
Mounting and bearing selection
Before mounting, check the shaft, tapered surfaces, thread and longitudinal slit. Driving the bearing up the taper affects both the fit and internal clearance. Follow the procedure and checking method specified for the bearing; nut tightening force alone does not confirm correct mounting.
Exact version identification
The H series differs in design and use from AH or AHX withdrawal sleeves. The same shaft diameter does not establish interchangeability. Compare the full designation, thread, length, matching nut and locking element. Dimensions of a similar version are no substitute for the drawing.
Servicing and remounting
During dismounting, also inspect the shaft and bearing seats. A new sleeve does not repair a damaged seating surface or a worn bearing. Restore the specified axial retention when reassembling. Load capacity, operating speed and lubrication of the complete arrangement depend on the selected bearing and service conditions, not on the sleeve alone.
Additional parameters
| Category: | Adapter sleeves |
|---|---|
| Weight: | 0.319 kg |
| Component type: | Adapter sleeve |
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any STEYR product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
STEYR – product identification and supply
The STEYR designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.