Bearing sleeve - H217 ZKL

Not rated Rating details
€40,84 / pcs €33,75 excl. VAT Measure price:
In stock (14 pcs)
Delivery to:
24. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€40,84 / pcs
5 - 9 pcs = discount 3 %
€39,61 / pcs
10 - 24 pcs = discount 6 %
€38,39 / pcs
25 - 49 pcs = discount 9 %
€37,16 / pcs
50 and more pcs = discount 12 %
€35,94 / pcs
You save €0

H217 ZKL is an adapter sleeve for mounting a tapered-bore bearing on a cylindrical shaft of 75 mm diameter. The sleeve length is 50 mm. It forms the mounting connection between the shaft and bearing inner ring.

Detailed information

Product detailed description

H217 ZKL is an adapter sleeve for mounting a tapered-bore bearing on a cylindrical shaft of 75 mm diameter. The sleeve length is 50 mm. It forms the mounting connection between the shaft and bearing inner ring.

Verified dimensions

  • Shaft diameter d₀: 75 mm
  • Nominal bearing bore d: 85 mm
  • Sleeve length L: 50 mm
  • Outside diameter over nut D: 110 mm
  • Catalogue dimension a: 18 mm
  • Thread d_z: M85×2
  • Locknut: KM17
  • Lockwasher: MB17
  • Sleeve material: Steel

Shaft diameter and nominal bearing bore are different dimensions. The cylindrical inside surface seats on the shaft; the external taper receives the bearing. The outside dimension over the nut is not the bearing outside diameter. Do not select a replacement from one dimension alone. Sleeve length is also different from bearing width.

How the adapter works

Tightening the locknut drives the bearing along the taper and clamps the sleeve onto the shaft. This is an H-series adapter sleeve; AH withdrawal sleeves use a different mounting arrangement and are not interchangeable simply because their bores match. The sleeve is not a plain bearing and contains no raceways or rolling elements.

Mounting and clearance checks

Clean the shaft and mating surfaces, inspect the thread and check the complete bearing designation, including its tapered-bore version. Drive-up affects internal bearing clearance, so verify the final setting by the method prescribed for that bearing. The sleeve designation alone does not determine a universal tightening torque or number of nut turns. Allow axial space for the nut and access for mounting tools.

Nut and locking

ZKL lists H217 as the sleeve complete with locknut KM17 and lockwasher MB17. The nut drives up and locates the bearing; the washer prevents the nut from loosening. Apply the locking after achieving the correct mounting setting. The bearing itself is a separate component; its performance data are not sleeve specifications.

Maintenance and replacement

Before remounting, inspect taper, shaft seat, thread and locking components. Replacing the sleeve does not repair a worn shaft or damaged bearing inner ring. Lubricant, relubrication interval, speed and load capacity depend on the complete bearing arrangement. Bearing lubrication is separate from preparing the mounting contact surfaces. Complete the specified nut locking before operation.

Additional parameters

Category: Adapter sleeves
Weight: 1.03 kg
Shaft diameter d₀: 75 mm
Nominal bearing bore d: 85 mm
Sleeve length L: 50 mm
Outside diameter over nut D: 110 mm
Catalogue dimension a: 18 mm
Thread d_z: M85×2
Locknut: KM17
Lockwasher: MB17
Sleeve material: Steel

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any ZKL product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about ZKL products

ZKL – Product range and selection

The ZKL range includes, for example: ball bearings.

Examples from our catalogue

  • B7016 AATB P5 OL ZKL
  • 22206 EJA ZKL
  • UCP212-36 ZKL

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.

Manufacturing company : ZKL, a.s.
Address : Jedovnická 2346/8, 628 00 Brno, Czech Republic
E-mail : head@zkl.cz