Bearing - 52209 ZKL
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
Bearing - 52209 ZKL
52209 ZKL double-direction thrust bearing
52209 ZKL is a double-direction thrust ball bearing for axial shaft location and axial loads in both directions. The assembly consists of one shaft washer, two housing washers and two ball-and-cage assemblies. Its individual parts are separable, simplifying mounting and inspection.
Key features
- carries axial loads in both directions,
- separable design for independent mounting of washers and ball assemblies,
- accurate axial shaft location when the abutment surfaces are correctly aligned,
- open design requiring suitable lubrication and protection,
- not designed to carry radial loads.
Technical data
- Designation: 52209 ZKL
- Type: double-direction thrust ball bearing
- Bore diameter d: 35 mm
- Outside diameter D: 73 mm
- Overall height H: 37 mm
- Mass: approximately 0.62 kg
- Manufacturer: ZKL
Installation and operation
The two housing washers seat against fixed abutment surfaces while the shaft washer is guided on the shaft. Abutment surfaces must be clean, flat and perpendicular to the axis so that the load is distributed evenly. During operation, the bearing requires sufficient axial load and appropriate lubrication; do not use it to carry radial forces. Before replacement, compare the 52209 designation and all mounting dimensions with the original assembly.
Additional parameters
| Category: | Thrust ball bearings |
|---|---|
| Weight: | 0.62 kg |
Product rating
Be the first who will post an article to this item!
We can source almost any ZKL product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about ZKL productsZKL – Product range and selection
The ZKL range includes, for example: ball bearings.
Examples from our catalogue
- B7016 AATB P5 OL ZKL
- 22206 EJA ZKL
- UCP212-36 ZKL
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
| Manufacturing company : | ZKL, a.s. |
|---|---|
| Address : | Jedovnická 2346/8, 628 00 Brno, Czech Republic |
| E-mail : | head@zkl.cz |