Bearing unit - UCP 210 MTM

SY 30 TF SKF by SKF: pillow block bearing unit.

Dimensions according to drawing: Shaft diameter: 30 mm; L = 152 mm; J = 117.5 mm; H = 82.5 mm; A = 40 mm; H2 = 17 mm; H1 = 42.9 mm

DV 313 A KOVO CHEB: hanger bearing housing.

SNG 515 612 GLH is a split plummer block housing for an arrangement with a separately selected bearing.

UCFL 206 ASAHI is a complete flanged bearing unit for a 30 mm shaft. It combines bearing UC206 with cast-iron housing FL206 and locks to the shaft using set-screws.

UCF 208 MSC by MSC: flange bearing unit (square flange). Shaft diameter: 40 mm.

UCP 213 JIB is a complete pillow block bearing unit for a 65 mm shaft. It combines bearing UC213 with cast-iron housing P213; set-screws lock the inner ring to the shaft.

UCFC 213 ASAHI is a round flanged bearing unit with spigot joint for a 65 mm shaft. Shaft locking: set screws.

This Benn product carries the complete designation RL 95. When replacing a part, compare its complete marking and brand with the assembly documentation.

QMPH30J508SM by Timken: spherical roller bearing housed unit with a solid-block housing.

Dimensions according to drawing: Shaft diameter: 5 1⁄2 in.; L = 199.1 mm; J = 24 mm; H = 76.2 mm; A = 169.9 mm; B = 330.7 mm; K = 75.9 mm

UCFC 216 CX is a complete flanged bearing unit for an 80 mm shaft. It combines bearing UC216 with cast-iron housing FC216 and locks to the shaft using set-screws. The round flange has four fixing holes and a locating spigot.

This KUVAL product carries the complete designation S 617. When replacing a part, compare its complete marking and brand with the assembly documentation.

QMPX34J180ST by Timken: spherical roller bearing housed unit with a solid-block housing.

Dimensions according to drawing: Shaft diameter: 180 mm; L = 224.3 mm; J = 30 mm; H = 73.2 mm; A = 200.0 mm; B = 400.1 mm; E = 112.8 mm