Bearing unit - UCFC 213 ASAHI

Not rated Rating details
€85,55 / pcs €70,70 excl. VAT Measure price:
In stock (4 pcs)
Delivery to:
23. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€85,55 / pcs
5 - 9 pcs = discount 3 %
€82,98 / pcs
10 - 24 pcs = discount 6 %
€80,42 / pcs
25 - 49 pcs = discount 9 %
€77,85 / pcs
50 and more pcs = discount 12 %
€75,28 / pcs
You save €0

UCFC 213 ASAHI is a round flanged bearing unit with spigot joint for a 65 mm shaft. Shaft locking: set screws.

Detailed information

Product detailed description

UCFC 213 ASAHI is a round flanged bearing unit with spigot joint for a 65 mm shaft.

The unit combines an insert bearing with a flanged housing. The bearing allows the shaft to rotate, while the housing transfers forces into the machine structure. Set screws secure the inner ring to the shaft; this is not an eccentric-collar or adapter-sleeve design. Four mounting bolts attach the flange to a suitable support face.

Dimensions and assembly components

  • Designation: UCFC 213 ASAHI
  • Product type: Round flanged bearing unit with spigot joint
  • Shaft diameter: 65 mm
  • Shaft locking: Set screws
  • Insert bearing: UC213
  • Housing: FC213
  • H: 205 mm
  • A1: 36 mm
  • J: 170 mm
  • J1: 120.2 mm
  • N: 19 mm
  • A2: 16 mm
  • A3: 14 mm
  • A: 50 mm
  • H3: 145 mm
  • A0: 69.7 mm
  • B: 65.1 mm
  • S: 25.4 mm
  • Specified mounting bolt size: M16
  • Catalogue unit mass: 5.11 kg
  • Bearing dynamic rating Cr: 57.5 kN
  • Bearing static rating Cor: 40 kN
  • Bearing set-screw torque: 23.5 Nm
  • Set-screw hex key: 5 mm
  • Grease per replenishment: 11.8 g

Shaft diameter refers to the bearing bore. The other dimensions in the overview use this manufacturer’s drawing symbols and must not be confused with identically labelled dimensions of another brand. For replacement, compare hole pitch, thicknesses, axial projections and access to the set screws. The specified mounting bolt size does not mean that bolts are automatically supplied with the unit.

UCFC 213 ASAHI combines bearing UC213 with housing FC213. Its four-hole round flange has a centring spigot H3 = 145 mm, with axial depth A3 = 14 mm. Dimensions J = 170 mm and J1 = 120.2 mm describe the mounting-hole layout; hole diameter is N = 19 mm and the specified mounting bolts are M16. Inner-ring width B = 65.1 mm differs from overall axial dimension A0 = 69.7 mm.

Dynamic rating Cr = 57.5 kN and static rating Cor = 40 kN are catalogue ratings of bearing UC213, not permissible loads for the complete unit or machine. The standard unit weighs 5.11 kg. Covered versions UCFC213C(E) and CUCFC213C(CE) have distinct designations and associated dimensions; their covers and masses do not automatically apply to this product.

Mounting and lubrication

Slide the unit onto a clean shaft without impact, with the set screws loosened so their tips do not project into the bore. Seat the flange on a flat, sufficiently rigid face, check alignment and then complete locking. Check free rotation after mounting. Match lubrication and maintenance intervals to actual service; shaft diameter alone does not determine the permissible load of the complete arrangement.

The ASAHI manual specifies 23.5 Nm tightening torque and a 5 mm hexagonal key for the UC213 set screws. This torque secures the bearing to the shaft; it is not the flange mounting-bolt torque. The stated grease quantity is 11.8 g per replenishment, not the factory fill or a time interval. Clean the grease fitting before replenishing and choose the interval for the operating conditions.

Manufacturer documentation

Mounting and lubrication (ASAHI)

Additional parameters

Category: Bearing housings
Weight: 5.8 kg
Designation: UCFC 213 ASAHI
Product type: Round flanged bearing unit with spigot joint
Shaft diameter: 65 mm
Shaft locking: Set screws
Insert bearing: UC213
Housing: FC213
H: 205 mm
A1: 36 mm
J: 170 mm
J1: 120.2 mm
N: 19 mm
A2: 16 mm
A3: 14 mm
A: 50 mm
H3: 145 mm
A0: 69.7 mm
B: 65.1 mm
S: 25.4 mm
Specified mounting bolt size: M16
Catalogue unit mass: 5.11 kg
Bearing dynamic rating Cr: 57.5 kN
Bearing static rating Cor: 40 kN
Bearing set-screw torque: 23.5 Nm
Set-screw hex key: 5 mm
Grease per replenishment: 11.8 g

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any ASAHI product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about ASAHI products

ASAHI – Product range and selection

We can help identify the required version of a ASAHI product from the complete designation and available documentation.

Examples from our catalogue

  • UK 210 ASAHI
  • UCFC 210 ASAHI
  • UCT 312 ASAHI

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.