Bearing unit - UCP 316 D1 NTN

Not rated Rating details
€319,28 / pcs €263,87 excl. VAT Measure price:
In stock (2 pcs)
Delivery to:
17. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€319,28 / pcs
5 - 9 pcs = discount 3 %
€309,70 / pcs
10 - 24 pcs = discount 6 %
€300,12 / pcs
25 - 49 pcs = discount 9 %
€290,54 / pcs
50 and more pcs = discount 12 %
€280,97 / pcs
You save €0

UCP 316 D1 NTN is a pillow block bearing unit for an 80 mm shaft. Two set screws lock the bearing to the shaft, and suffix D1 identifies the relubricatable version.

Detailed information

Product detailed description

UCP 316 D1 NTN is a pillow block bearing unit for an 80 mm shaft. Two set screws lock the bearing to the shaft, and suffix D1 identifies the relubricatable version.

Construction and bearing

The unit combines a ball bearing with a one-piece cast iron housing. The spherical outer ring matches the housing’s spherical seat, allowing alignment during mounting. Its internal construction is that of a single-row ball bearing for radial and axial forces. Both sides have a synthetic rubber seal and slinger combination. Two set screws secure the inner ring to the shaft, while the two base fixing holes connect the housing to the support structure.

Selection and mounting dimensions

  • Designation: UCP 316 D1 NTN
  • Product type: Pillow block bearing unit
  • Shaft diameter: 80 mm
  • Catalogue dimension H: 106 mm
  • Catalogue dimension L: 400 mm
  • Catalogue dimension J: 300 mm
  • Catalogue dimension A: 110 mm
  • Catalogue dimension N: 27 mm
  • Catalogue dimension N1: 40 mm
  • Catalogue dimension H1: 40 mm
  • Catalogue dimension H2: 210 mm
  • Catalogue dimension L1: 110 mm
  • Catalogue dimension B: 86 mm
  • Catalogue dimension S: 34 mm
  • Shaft locking: Set screws
  • Specified mounting bolt size: M22
  • Housing material: Cast iron
  • Number of fixing holes: 2
  • Lubrication: Relubricatable D1 version
  • Bearing insert: UC316D1
  • Housing: P316D1
  • Dynamic load rating Cr: 123 kN
  • Static load rating Cor: 86.5 kN

H 106 mm is shaft centre height above the mounting face; H2 210 mm is overall housing height. Length L 400 mm and pitch J 300 mm define the base arrangement. N 27 mm and N1 40 mm are the width and length of the slotted fixing hole. Housing width A 110 mm differs from inner-ring width B 86 mm. S 34 mm is the distance from the inner-ring face to the bearing centre.

Mounting and interfaces

Seat the base on a clean, flat and sufficiently rigid support and check alignment with the other bearing position. The catalogue specifies M22 base bolts; their size does not determine set-screw torque or automatic supply contents. Lock the bearing on a clean shaft following NTN’s mounting procedure, without transmitting force through the balls. Check free rotation after mounting. For replacement, consider centre height, bolt spacing and space around the housing together.

Lubrication and maintenance

D1 is an essential part of the designation: the unit permits relubrication through a grease fitting. The factory grease fill and seals allow installation of the prepared assembly. Clean the fitting before adding grease and keep contamination out; choose the quantity and interval for load, speed and environment according to NTN instructions. The designation without D1 identifies a different, maintenance-free version. The catalogue assigns bearing UC316D1 and housing P316D1 to this unit. Dynamic rating Cr 123 kN and static rating Cor 86.5 kN belong to bearing UC316D1, not automatically to the entire machine structure. C or CM prefix versions have dust covers and associated dimensions; those covers are not part of the designation UCP 316 D1.

Additional parameters

Category: Bearing housings
Weight: 17 kg
Designation: UCP 316 D1 NTN
Product type: Pillow block bearing unit
Shaft diameter: 80 mm
Catalogue dimension H: 106 mm
Catalogue dimension L: 400 mm
Catalogue dimension J: 300 mm
Catalogue dimension A: 110 mm
Catalogue dimension N: 27 mm
Catalogue dimension N1: 40 mm
Catalogue dimension H1: 40 mm
Catalogue dimension H2: 210 mm
Catalogue dimension L1: 110 mm
Catalogue dimension B: 86 mm
Catalogue dimension S: 34 mm
Shaft locking: Set screws
Specified mounting bolt size: M22
Housing material: Cast iron
Number of fixing holes: 2
Lubrication: Relubricatable D1 version
Bearing insert: UC316D1
Housing: P316D1
Dynamic load rating Cr: 123 kN
Static load rating Cor: 86.5 kN

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any NTN product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about NTN products

NTN – Product range and selection

The NTN range includes, for example: ball bearings, cylindrical and spherical roller bearings, bearing units.

Examples from our catalogue

  • 1R 30X35X12 5 NTN
  • UCC316HT2D1 NTN
  • UKT215D1 NTN

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.

Manufacturing company : NTN Europe
Address : 1 rue des Usines, B.P. 2017, 74010 Annecy, France
E-mail : mailing.contact@ntn-snr.fr