MP4
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
QMPG30J150ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 150 mm; L = 198.6 mm; J = 24 mm; H = 76.2 mm; A = 170.0 mm; B = 332.2 mm; K = 75.9 mm
FYTB 30 TF SKF by SKF: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 30 mm; L = 83 mm; J = 116.5 mm; H = 141.5 mm; B = 38.1 mm; N = 11.5 mm; Da = 76.2 mm
RCJTY 20 N INA by INA: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 20 mm; L = 61 mm; H = 112 mm; N = 11.5 mm; A1 = 10 mm
This KUVAL product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCF 210 MTM by MTM: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 50 mm; a = 143 mm; e = 111 mm; i = 22 mm; g = 18 mm; l = 40 mm; S = 16 mm
Split plummer block housing SN 510 CX. Shaft diameter: 45 mm; D = 90 mm.
This NTN product carries the complete designation UCFL 204 J. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 508. When replacing a part, compare its complete marking and brand with the assembly documentation.
SY 508 M SKF by SKF: pillow block bearing housing.
Dimensions according to drawing: L = 175 mm; J = 135.5 mm; H = 99 mm; A = 48 mm; H2 = 19 mm; H1 = 49.2 mm
This INA product carries the complete designation MNE 11. When replacing a part, compare its complete marking and brand with the assembly documentation.
P 210 SNR by SNR: bearing housing.
Dimensions according to drawing: L = 206 mm; J = 159 mm; H = 57.2 mm; A = 60 mm; H2 = 114 mm; H1 = 22 mm
UCFC 208 BBC by BBC: flange bearing unit (round flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 145 mm; p = 120 mm
Product detailed description
MP4 by RHP: pillow block bearing unit.
Technical specifications
- Designation: MP4
- Manufacturer: RHP
- Shaft diameter: 4 in
- L: 431.8 mm
- H: 127.00 mm
- H1: 33.3 mm
- H2: 254.0 mm
- J max: 371.5 mm
- J min: 301.6 mm
- G: 24 mm
- A: 120.6 mm
- Series: MP
- Housing material: cast iron
- Shaft locking: set-screw locking
- Sealing: single-lip seal
- Lubrication: grease lubrication
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 34.4 kg |
| Délka základny domku (mm): | 431.8 |
| Shaft diameter (mm): | 101.6 |
| Šířka ložiskové části jednotky (mm): | 117.48 |
| Šířka základny domku (mm): | 120.6 |
| Výška domku (mm): | 254 |
| Výška osy hřídele (mm): | 127 |
UCFC 216 FYH is a four-bolt round flanged bearing unit with a locating spigot for an 80 mm shaft. Two set screws secure it to the shaft.
DV 312 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 312 A designation, mounting arrangement and bearing seat.
This STEYR product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCFC 207 neu: flange bearing unit (round flange).
Dimensions according to drawing: Shaft diameter: 35 mm; L = 135 mm; J = 110 mm; A = 34 mm; B = 42.9 mm; N = 14 mm; J1 = 77.8 mm
FYC 508 SKF by SKF: flanged bearing housing (round flange).
Dimensions according to drawing: L = 145 mm; J = 120 mm; N = 14 mm; Da = 100 mm; A1 = 36 mm; A3 = 10 mm
UCF 209 DPI is a square flanged bearing unit for a 45 mm shaft. Shaft locking: set screws.
SY 40 TF SKF by SKF: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 40 mm; L = 175 mm; J = 135.5 mm; H = 99 mm; A = 48 mm; H2 = 19 mm; H1 = 49.2 mm
Separate pedestal housing for a radial insert ball bearing. ASE 14 13 INA identifies the housing; the complete arrangement also depends on the selected bearing.
SN 510 SLB is a split plummer block housing for an arrangement with a separately selected bearing.
UCP 204 IB is a complete bearing and housing unit with a 20 mm bore, standard Y-bearing sealing identified as 2F, and standard lubrication.
SNH 507-606 SKF is a split plummer-block housing made of GG 20 grey cast iron. Width A is 82 mm and overall height H is 93 mm. The housing is supplied without a bearing or seals.
This EU-ROLL product carries the complete designation SN 512. When replacing a part, compare its complete marking and brand with the assembly documentation.
Split plummer block housing SN 513 DPI. Shaft diameter: 60 mm; L = 275 mm.
QMMC30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; A = 19.8 mm; B = 38.1 mm; D = 5.6 mm; S = 192.0 mm; C = 205.0 mm; G = 154.4 mm
This Benn product carries the complete designation RL 95. When replacing a part, compare its complete marking and brand with the assembly documentation.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any RHP product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
RHP – product identification and supply
The RHP designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.