4T-594/592 A

Bearing - 6004 2RS ZVL

20 × 42 × 12 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.

Bearing - 22313 M ZKL

65 × 140 × 48 mm. double-row spherical roller bearing with a solid machined brass cage. Its self-aligning design carries high radial loads, axial loads in both directions and accommodates operating misalignment.

Bearing - 6201 ZKL

12 × 32 × 10 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.

Bearing - 6005 2RS SKF

25 × 47 × 12 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - 626 2Z FAG

6 × 19 × 6 mm. is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds. The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.

Bearing - 626 2Z GPZ

6 × 19 × 6 mm. Single-row deep-groove ball bearing. Metal shields on both sides; compare the complete designation, including suffixes.

Bearing - 6000 2RSH SKF

10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 6906 2RS EZO

30 × 47 × 9 mm. Thin-section, single-row deep groove ball bearing with contact rubber seals on both sides. The CN-clearance design with a steel cage combines compact dimensions with protection of the lubricant from ordinary contaminants.

Bearing - 627 ZKL

7 × 22 × 7 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.