Bearing - 10X22214 EAW33EE SNR

Spherical plain bearing - GAKFL 10 PB ELGES

10 × 22 × 14 mm. ELGES needle roller bearing GAKFL 10 PB for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - 608 Z ZKL

8 × 22 × 7 mm. Single-row deep-groove ball bearing with a non-contact metal shield on one side (Z). Check the complete designation and application suitability.

Bearing - 1308 K STEYR

40 × 90 × 23 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against STEYR documentation and the requirements of the specific application.

Bearing - 30213 E ZKL

65 × 120 × 24.75 mm. single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.

Bearing - 6003 RS ZKL

17 × 35 × 10 mm. Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.

Bearing - 16115 STEYR

75 × 110 × 12 mm. Open single-row deep-groove ball bearing with a slim cross-section. The unshielded and unsealed design provides direct access for lubrication but requires a clean and suitably lubricated installation.

Bearing - B7213-E-T-P4S-UL FAG

Bearing.

Bearing - 608 2Z SKF

8 × 22 × 7 mm. Single-row SKF bearing with non-contact metal shields on both sides (2Z) and normal radial clearance CN. Check the complete designation before ordering.

Bearing - 6203 2RS CW

17 × 40 × 12 mm. single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.

Bearing - 6201 2ZR ZKL

Bearing - is a single-row deep groove ball bearing with a cylindrical bore, standard steel cage and two metallic shields 2ZR. The shields adhere to the flat surface of the inner ring. Dimensions: inner diameter d 12 mm, outer diameter D 32 mm, width B 10 mm; weight 0.037 kg. The bearing has normal. Cn internal clearance, standard precision and standard lubrication. confirms no external….

Bearing - 61805 2RS SKF

25 × 37 × 7 mm. Single-row deep groove ball bearing with compact dimensions; the corresponding SKF catalogue designation is 61805-2RS1. Contact seals on both sides help retain the grease and protect the bearing against contamination.