Bearing - 181115 181190 XG GAMET
Product detailed description
Bearing - 181115 181190 XG GAMET
GAMET 181115 181190 XG bearing
Use this product as a replacement only when the complete designation, dimensions and design fully match the original part.
Check before ordering
• compare the designation 181115 181190 XG GAMET;
• verify dimensions, design, seating and the requirements of the specific application;
• confirm technical data in GAMET manufacturer documentation.
Installation and operation
For reliable operation, ensure a clean installation environment, correct seating and lubrication appropriate for the application. If in doubt, verify suitability with a specialist or in the manufacturer documentation.
Bearing - 609 2Z ZKL
9 × 24 × 7 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.
Bearing - 6207 2RS SKF
35 × 72 × 17 mm. Rubber seals on both sides. Versatile SKF single-row deep groove ball bearing for reliable rotating assemblies.
Bearing - 6006 2RS ZVL
30 × 55 × 13 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.
Bearing - 627 ZKL
7 × 22 × 7 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
Bearing - 6305 2Z C3 GJN SKF
25 × 62 × 17 mm. Single-row SKF Explorer 6305-2Z/C3GJN deep groove ball bearing with non-contact sheet-steel shields on both sides and C3 radial internal clearance. The grease-lubricated design is suitable for high rotational speeds.
Bearing - 6004 2RS ZVL
20 × 42 × 12 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.
Bearing - 3208 ZKL
40 × 80 × 30 mm. double-row angular contact ball bearing for combined radial and axial loads in both directions. Its compact design provides rigid and accurate shaft guidance.
Bearing - 623 ZKL
3 × 10 × 4 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any GAMET product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
GAMET – product identification and supply
The GAMET designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.