Bearing - 28584/28521 KOYO
Product detailed description
Bearing - 28584/28521 KOYO
28584/28521 KOYO is a single-row tapered roller bearing set in the inch dimension series, measuring 52.388 × 92.075 × 24.608 mm (d × D × T). It comprises the 28584 cone with inner ring and rollers and the separate 28521 outer ring (cup). The tapered raceways carry high radial load together with axial load in one direction; bearings are normally paired where axial load must be supported in both directions.
Key features
- bore diameter d: 52.388 mm
- outside diameter D: 92.075 mm
- total width T: 24.608 mm
- inner-ring width: 25.4 mm; outer-ring width: 19.845 mm
- matched 28584 cone and 28521 cup
- open, separable inch-series design
- manufacturer / brand: KOYO (JTEKT)
Typical applications
The set is used in wheel hubs, transmissions, differentials, industrial gear units, agricultural machinery and other assemblies exposed to combined radial and one-directional axial loading.
Mounting and selection
Use the cone and cup as the corresponding set. During mounting, apply force only through the ring being fitted, provide the specified operating lubrication and set the required internal clearance or preload. Before ordering, verify the full designation, dimensions, axial-load direction, arrangement and the equipment manufacturer’s requirements.
Additional parameters
| Category: | Bearings |
|---|---|
| EAN: | 3663952282589 |
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any KOYO product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
KOYO – product identification and supply
The KOYO designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | JTEKT Europe Bearings B.V. |
|---|---|
| Address : | Markerkant 13-01, 1314 AL Almere, The Netherlands |
| E-mail : | info-eu@jtekt.eu |