Bearing - 309726 DA (VKBC 20012) SKF

Bearing - 22210 E SKF

50 × 90 × 23 mm. Open double-row spherical roller bearing by SKF.

Spherical plain bearing - GAKFR 16 PB ELGES

spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.

Needle roller bearing - HK 3520 MTM

35 × 42 × 20 mm. MTM needle roller bearing HK 3520 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - 6007 2RS1 SKF

35 × 62 × 14 mm. Rubber seals on both sides.

Bearing - LR 50 8 2RSR INA

8 × 24 × 11 mm. LR 50/8 2RSR INA is a double-row support roller with a crowned outer profile and 2RSR rubber seals on both sides.

Linear ball bearing - KSO20-PP INA

is an open self-aligning linear ball bearing designed for precise and smooth linear motion on a supported guide shaft with a diameter of 20 mm. The PP version is fitted with lip seals on both sides to help protect the internal components against contamination and retain lubricant. INA bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design….

Bearing - ZARN60120-TV-A INA

is a combined INA bearing designed for applications requiring reliable radial and axial load capacity. Bore d: 60 mm. Outside diameter D: 105 mm. Width B: 82 mm. Flange diameter D1: 120 mm. Polyamide cage, without seal. Load ratings: dynamic radial 44,500 N, static radial 92,000 N; dynamic axial 187,000 N, static axial 550,000 N Speed: 950 rpm with grease, 2,700 rpm with oil. Do not confuse the bearing….

Bearing - 30204 A KLF

20 × 47 × 15.25 mm. single-row tapered roller bearing for combined radial and axial loads acting in one direction. Its separable design simplifies installation and accurate clearance adjustment.

Bearing - 6203 2RS KINEX

17 × 40 × 12 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 32313 A FAG

65 × 140 × 51 mm. bearing. Verify the complete designation and dimensions in manufacturer documentation before selection.

Bearing - UC 206 MGK

30 × 62 × 38.1 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - NU 2207 ZKL

35 × 72 × 23 mm. single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.