Bearing - BS2 2308 2CS HFH

40x68x19 mm

Single-row tapered roller bearing 32008 JR DPI for high radial loads combined with axial load in one direction. Its separable design simplifies mounting and allows running clearance or preload to be set in a paired arrangement.

30x47x11 mm

Single-direction thrust ball bearing 51106 N ZKL with a separable design for reliable transmission of axial load in one direction. The compact 511 series is suitable where axial installation space is limited.

55x90x22 mm

51211 ZKL single-direction thrust ball bearing is designed to carry axial load in one direction. Its separable construction consists of a shaft washer, a housing washer and a ball-and-cage assembly.

17x47x14 mm

Single-row deep groove ball bearing 6303 Z SRO with a non-contact metal shield on one side. A versatile design for radial loads and light axial loads in both directions, offering low friction and good speed capability.

50x80x20 mm

Single-row tapered roller bearing 32010 JR DPI for high radial load combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently.

45x100x27.25 mm

31309 A FLT single-row tapered roller bearing carries high radial load together with axial load in one direction. Its separable inner assembly with rollers and separate outer ring simplify mounting.

50x110x27 mm

1310 ZKL double-row self-aligning ball bearing with a cylindrical bore can accommodate slight misalignment between the shaft and housing. The open design is suitable for radial loads and limited axial loads in both directions.

95x170x45.5 mm

Single-row tapered roller bearing 32219 E ZKL for high radial loads and axial load in one direction. The separable design simplifies mounting; the E suffix is part of the exact designation and must match the equipment documentation when replacing the bearing.

40x48x20 mm

Full-complement drawn-cup needle roller bearing DL 4020 NADELLA with open ends and without an inner ring. It provides high radial load capacity within a very small radial section.

35x72x23 mm

NJ 2207 ZKL single-row cylindrical roller bearing is designed for high radial loads and can also locate the shaft axially in one direction. Its separable construction allows the inner ring to be installed independently of the outer ring and roller assembly.