Bearing - DB 2520 KOYO
Product detailed description
Bearing - DB 2520 KOYO
Bearing DB 2520 KOYO.
Verify the exact design and compatibility using the manufacturer designation and application requirements.
Bearing - 6305 2Z C3 GJN SKF
25 × 62 × 17 mm. Single-row SKF Explorer 6305-2Z/C3GJN deep groove ball bearing with non-contact sheet-steel shields on both sides and C3 radial internal clearance. The grease-lubricated design is suitable for high rotational speeds.
Bearing - 6306 2RS TIMKEN
30 × 72 × 19 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Check the complete designation before ordering.
Bearing - 6306 TB FAG
30 × 72 × 19 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - RNU 228 M (vnitřní kroužek: 168,30 mm) neu
140 × 250 × 42 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6306 Z ZKL
30 × 72 × 19 mm. Single-row deep groove ball bearing with a non-contact metal shield on one side. It carries radial and limited axial loads in both directions; the opposite side remains open.
Bearing - 607 2Z EU
7 × 19 × 6 mm. Metal shields on both sides.
Bearing - 626 2Z FAG
6 × 19 × 6 mm. is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds. The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.
Bearing - 3206 ZKL
30 × 62 × 23 mm. double-row angular contact ball bearing for combined radial and axial loads in both directions. Its compact design provides rigid and accurate shaft guidance.
Bearing - 6006 2RS ZVL
30 × 55 × 13 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.
Bearing - 6000 SKF
10 × 26 × 8 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any KOYO product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
KOYO – product identification and supply
The KOYO designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | JTEKT Europe Bearings B.V. |
|---|---|
| Address : | Markerkant 13-01, 1314 AL Almere, The Netherlands |
| E-mail : | info-eu@jtekt.eu |