Bearing - GB12438 SNR
Product detailed description
Bearing - GB12438 SNR
Bearing GB12438 SNR.
Verify the exact design and compatibility using the manufacturer designation and application requirements.
Bearing - 1726210 2RS1 SKF
bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.
Bearing - NU 2207 ZKL
35 × 72 × 23 mm. single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.
Bearing - Q 310 DKF
Bearing.
Bearing - 6200 2Z MSC
10 × 30 × 9 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against MSC documentation and the requirements of the specific application.
Bearing - 608 Z ZKL
8 × 22 × 7 mm. Single-row deep-groove ball bearing with a non-contact metal shield on one side (Z). Check the complete designation and application suitability.
Bearing - VKBA 3570 SKF
Bearing.
Bearing - 6003 RS ZKL
17 × 35 × 10 mm. Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.
Linear ball bearing - KSO20-PP INA
is an open self-aligning linear ball bearing designed for precise and smooth linear motion on a supported guide shaft with a diameter of 20 mm. The PP version is fitted with lip seals on both sides to help protect the internal components against contamination and retain lubricant. INA bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design….
Spherical plain bearing - GAKFL 16 PB ELGES
16 × 32 × 21 mm. ELGES needle roller bearing GAKFL 16 PB for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.
Spherical plain bearing - GAKFL 6 PB ELGES
6 × 16 × 9 mm. spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.
Bearing - 22209 E SKF
45 × 85 × 23 mm. Bearing for industrial rotating assemblies. Before selection, verify the complete designation, dimensions, and requirements of the specific application.
Spherical plain bearing - GAKFR 14 PB ELGES
spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.
Bearing - PLC 23 5 ZKL
30 × 49.25 × 13.6 mm. ZKL PLC 23-5 special clutch ball bearing with a pressed-steel housing and steel cage. Intended for the later clutch design used on. Škoda 105–130 vehicles; always confirm compatibility by designation and dimensions.
Needle roller bearing - HK 3018 2RS INA
30 × 37 × 18 mm. INA needle roller bearing HK 3018 2RS for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.
Bearing - B7213-E-T-P4S-UL FAG
Bearing.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any SNR product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SNR – product identification and supply
The SNR designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | NTN Europe |
|---|---|
| Address : | 1 rue des Usines, B.P. 2017, 74010 Annecy, France |
| E-mail : | mailing.contact@ntn-snr.fr |