Bearing - PW38720037CS PFI
Product detailed description
Bearing - PW38720037CS PFI
PFI PW38720037CS bearing
Use this product as a replacement only when the complete designation, dimensions and design fully match the original part.
Check before ordering
• compare the designation PW38720037CS PFI;
• verify dimensions, design, seating and the requirements of the specific application;
• confirm technical data in PFI manufacturer documentation.
Installation and operation
For reliable operation, ensure a clean installation environment, correct seating and lubrication appropriate for the application. If in doubt, verify suitability with a specialist or in the manufacturer documentation.
Bearing - 6202 ZKL
15 × 35 × 11 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.
Bearing - NU 2205 KINEX
25 × 52 × 18 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6306 2RS TIMKEN
30 × 72 × 19 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Check the complete designation before ordering.
Bearing - 32209 A KLF
Bearing.
Bearing - 6306 TB FAG
30 × 72 × 19 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - B7006 E 2RSD T P4S UM FAG
30 × 55 × 13 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 30206 A KLF
30 × 62 × 17.25 mm. single-row tapered roller bearing for high radial loads combined with axial load in one direction. The separable design allows the inner ring assembly and outer ring to be mounted independently.
Bearing - 3208 ZKL
40 × 80 × 30 mm. double-row angular contact ball bearing for combined radial and axial loads in both directions. Its compact design provides rigid and accurate shaft guidance.
Bearing - 6200 Z ZKL
10 × 30 × 9 mm. single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any PFI product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
PFI – product identification and supply
The PFI designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.