Bearing - Q 207 DKF
Product detailed description
Bearing - Q 207 DKF
Bearing Q 207 DKF.
Verify the exact design and compatibility using the manufacturer designation and application requirements.
Bearing - 624 P5 TPX ZKL
4 × 13 × 5 mm. bearing with increased P5 precision. Catalogue brand: TPX; compare the complete designation and physical marking before replacement.
Bearing - 6310 FAG
50 × 110 × 27 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6200 Z ZKL
10 × 30 × 9 mm. single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.
Bearing - 624 ZKL
4 × 13 × 5 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
Bearing - 30206 A KLF
30 × 62 × 17.25 mm. single-row tapered roller bearing for high radial loads combined with axial load in one direction. The separable design allows the inner ring assembly and outer ring to be mounted independently.
Bearing - 6005 2RS SKF
25 × 47 × 12 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.
Bearing - 30212 A ZVL
60 × 110 × 23.75 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any DKF product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
DKF – product identification and supply
The DKF designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | DKF Deutsche Kugellagerfabriken GmbH |
|---|---|
| Address : | Rosenthaler Straße 40/41, 10178 Berlin, Germany |
| E-mail : | mail@dkf-group.de |