SL1.5/8DEC
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
Cylindrical roller bearing. Manufacturer: RHP. Designation: SL1.5/8DEC. Price for 1 piece.Additional parameters
| Category: | Bearings |
|---|---|
| Weight: | 3 kg |
Bearing - ZARN60120-TV-A INA
is a combined INA bearing designed for applications requiring reliable radial and axial load capacity. Bore d: 60 mm. Outside diameter D: 105 mm. Width B: 82 mm. Flange diameter D1: 120 mm. Polyamide cage, without seal. Load ratings: dynamic radial 44,500 N, static radial 92,000 N; dynamic axial 187,000 N, static axial 550,000 N Speed: 950 rpm with grease, 2,700 rpm with oil. Do not confuse the bearing….
Bearing - ZARF 50115 TV A INA
50 × 115 × 60 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - ZKLF50115-2Z-XL INA
double-direction angular-contact thrust ball bearing 50 × 115 × 34 mm P plastic cage, P4 precision 2Z gap seals on both sides.
Bearing - ZKLF 2575 2RS 2AP INA
25 × 75 × 28 mm. Rubber seals on both sides.
Bearing - ZARN 3570 L TV A INA
35 × 70 × 70 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - GYE 17 KRR B INA
17 × 40 × 27.4 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - AM35 INA
INA bearing with designation AM35. Before ordering, compare the full designation and execution with the original part used in your equipment.
Bearing - 110BX48D32 BARDEN
bearing with the verified designation. Compare the complete designation, dimensional data and design with the original part. Confirm suitability for the specific bearing arrangement in BARDEN documentation.  
Bearing - 635 2RS GMN
5 × 19 × 6 mm. is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants. Its compact design supports radial load and moderate axial loads in both directions. It is well suited to small rotating mechanisms where dependable bearing protection and low maintenance requirements are….
Bearing - 3206 BD TVH FAG
30 × 62 × 23 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - F 324243 SET M5025 606 INA
6 × 17 × 6 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - ZKLF50115-2RS-XL INA
double-direction angular-contact thrust ball bearing 50 × 115 × 34 mm P plastic cage, P4 precision 2RS rubber seals on both sides.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any RHP product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
RHP – product identification and supply
The RHP designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.