Bearing - 625 ZR ZKL
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
625 ZR ZKL is a single-row radial ball bearing measuring 5 × 16 × 5 mm. Non-contact metal shield ZR on one side; opposite side open.
Construction and function
Balls rolling between the inner and outer rings primarily carry radial loads; the deep groove design also accommodates axial loads in both directions.
Dimensions and design
- Designation: 625 ZR ZKL
- Type: Single-row deep groove ball bearing
- Closure: Non-contact metal shield ZR on one side; opposite side open
- Bore diameter d: 5 mm
- Outside diameter D: 16 mm
- Width B: 5 mm
- Catalogue dimension rₛ: 0.3 mm
- Basic dynamic load rating Cᵣ: 1.9 kN
- Basic static load rating C₀ᵣ: 0.7 kN
- Fatigue load limit Cᵤ: 0.03 kN
- Reference speed – grease: 35000 min⁻¹
- Reference speed – oil: 42000 min⁻¹
- Catalogue bearing mass: 0.006 kg
Bore d 5 mm interfaces with the shaft seat, outside diameter D 16 mm with the housing bore, and B 5 mm is the bearing's axial width. The same variant has a catalogue rₛ dimension of 0.3 mm. When designing shoulders, distinguish this bearing dimension from the permissible corner radius of the mating part.
What ZR means
ZR identifies one metal shield. ZKL secures it in the outer ring; in the ZR design the shield extends slightly beyond the edge of the inner ring. The opposite side remains open. It is not a contact rubber seal. Unlike ZR, the 2ZR execution has shields on both sides.
Lubrication and operation
During mounting, check the orientation of the shielded and open sides against the lubricant supply and direction of contaminant entry. A single shield does not close the whole bearing or make it watertight. The arrangement must provide lubrication at the open side. Reference speeds for grease and oil do not specify the type or quantity of lubricant supplied. With grease lubrication and a rapidly rotating outer ring, consider possible grease leakage.
Mounting and replacement selection
Before mounting, check the dimensions, condition and cleanliness of both the shaft and housing. Apply pressing force through the ring being fitted with interference, never through the balls, and protect the shield from damage.
Additional parameters
| Category: | Single row ball bearingsBearings 5 × 16 × 5 mm |
|---|---|
| Weight: | 0.005 kg |
| Inner diameter d (mm): | 5 |
| Outer diameter D (mm): | 16 |
| Width (mm): | 5 |
| Designation: | 625 ZR ZKL |
| Type: | Single-row deep groove ball bearing |
| Closure: | Non-contact metal shield ZR on one side; opposite side open |
| Bore diameter d: | 5 mm |
| Outside diameter D: | 16 mm |
| Width B: | 5 mm |
| Catalogue dimension rₛ: | 0.3 mm |
| Basic dynamic load rating Cᵣ: | 1.9 kN |
| Basic static load rating C₀ᵣ: | 0.7 kN |
| Fatigue load limit Cᵤ: | 0.03 kN |
| Reference speed – grease: | 35000 min⁻¹ |
| Reference speed – oil: | 42000 min⁻¹ |
| Catalogue bearing mass: | 0.006 kg |
Product rating
Be the first who will post an article to this item!
We can source almost any ZKL product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about ZKL productsZKL – Product range and selection
The ZKL range includes, for example: ball bearings.
Examples from our catalogue
- B7016 AATB P5 OL ZKL
- 22206 EJA ZKL
- UCP212-36 ZKL
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
| Manufacturing company : | ZKL, a.s. |
|---|---|
| Address : | Jedovnická 2346/8, 628 00 Brno, Czech Republic |
| E-mail : | head@zkl.cz |