Bearing - 6300 2Z ZKL

Not rated Rating details
€1,49 / pcs €1,23 excl. VAT Measure price:
In stock (51 pcs)
Delivery to:
18. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€1,49 / pcs
5 - 9 pcs = discount 3 %
€1,45 / pcs
10 - 24 pcs = discount 6 %
€1,40 / pcs
25 - 49 pcs = discount 9 %
€1,36 / pcs
50 and more pcs = discount 12 %
€1,31 / pcs
You save €0

6300 2Z ZKL is a single-row radial ball bearing measuring 10 × 35 × 11 mm. It has non-contact metal shields on both sides, designated 2Z.

Detailed information

Product detailed description

6300 2Z ZKL is a single-row radial ball bearing measuring 10 × 35 × 11 mm. It has non-contact metal shields on both sides, designated 2Z.

Construction and function

Balls rolling between the inner and outer rings primarily carry radial loads; the deep groove design also accommodates axial loads in both directions.

Dimensions and design

  • Designation: 6300 2Z ZKL
  • Type: Single-row deep groove ball bearing
  • Closure: 2Z
  • Bore diameter d: 10 mm
  • Outside diameter D: 35 mm
  • Width B: 11 mm
  • Catalogue dimension rₛ: 0.6 mm
  • Basic dynamic load rating Cᵣ: 8.1 kN
  • Basic static load rating C₀ᵣ: 3.4 kN
  • Fatigue load limit Cᵤ: 0.16 kN
  • Reference speed – grease: 22000 min⁻¹
  • Catalogue bearing mass: 0.053 kg

Bore d 10 mm interfaces with the shaft seat, outside diameter D 35 mm with the housing bore, and B 11 mm is the bearing's axial width. The same variant has a catalogue rₛ dimension of 0.6 mm. When designing shoulders, distinguish this bearing dimension from the permissible corner radius of the mating part.

What 2Z means

The suffix 2Z identifies metal shields on both sides. The shields do not contact the inner ring, helping to keep friction low. They retain grease and reduce the entry of contaminants, but do not make the bearing watertight. Assemblies exposed to splashing or heavy contamination require an assessment of additional external protection.

Lubrication and operation

The bearing is grease lubricated and has no relubrication feature. Leave the shields in place during normal installation and do not wash out the grease fill. Grease life depends on speed, temperature, load and cleanliness, so no universal operating interval can be stated. With a rapidly rotating outer ring, the risk of grease leakage also needs consideration.

Mounting and replacement selection

Before mounting, check the dimensions, condition and cleanliness of both the shaft and housing. Apply pressing force through the ring being fitted with interference, never through the balls, and protect the shields from damage.

ZKL

Additional parameters

Category: Single row ball bearings, Bearings 10 × 35 × 11 mm
Weight: 0.055 kg
Inner diameter d (mm): 10
Outer diameter D (mm): 35
Width (mm): 11
Designation: 6300 2Z ZKL
Type: Single-row deep groove ball bearing
Closure: 2Z
Bore diameter d: 10 mm
Outside diameter D: 35 mm
Width B: 11 mm
Catalogue dimension rₛ: 0.6 mm
Basic dynamic load rating Cᵣ: 8.1 kN
Basic static load rating C₀ᵣ: 3.4 kN
Fatigue load limit Cᵤ: 0.16 kN
Reference speed – grease: 22000 min⁻¹
Catalogue bearing mass: 0.053 kg

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any ZKL product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about ZKL products

ZKL – Product range and selection

The ZKL range includes, for example: ball bearings.

Examples from our catalogue

  • B7016 AATB P5 OL ZKL
  • 22206 EJA ZKL
  • UCP212-36 ZKL

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.

Manufacturing company : ZKL, a.s.
Address : Jedovnická 2346/8, 628 00 Brno, Czech Republic
E-mail : head@zkl.cz