Bearing - RLS 10 SKF

Not rated Rating details
€60,19 / pcs €49,74 excl. VAT Measure price:
In stock (4 pcs)
Delivery to:
17. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€60,19 / pcs
5 - 9 pcs = discount 3 %
€58,38 / pcs
10 - 24 pcs = discount 6 %
€56,58 / pcs
25 - 49 pcs = discount 9 %
€54,77 / pcs
50 and more pcs = discount 12 %
€52,97 / pcs
You save €0

RLS 10 SKF is a single-row radial ball bearing measuring 31.75 × 69.85 × 17.462 mm. Open, without shields or seals.

Detailed information

Product detailed description

RLS 10 SKF is a single-row radial ball bearing measuring 31.75 × 69.85 × 17.462 mm. Open, without shields or seals.

Construction and function

Balls rolling between the inner and outer rings primarily carry radial loads; the deep groove design also accommodates axial loads in both directions.

Dimensions and design

  • Designation: RLS 10 SKF
  • Type: Single-row deep groove ball bearing
  • Bore diameter d: 31.75 mm
  • Outside diameter D: 69.85 mm
  • Width B: 17.462 mm
  • Closure: Open, without shields or seals
  • Basic dynamic load rating C: 22.5 kN
  • Basic static load rating C₀: 13.2 kN
  • Fatigue load limit Pᵤ: 0.55 kN
  • Reference speed: 20000 r/min
  • Limiting speed: 14000 r/min
  • Catalogue bearing mass: 0.3 kg
  • Catalogue dimension r₁,₂ min.: 1.6 mm
  • Catalogue dimension d₁: ≈ 42.3 mm
  • Catalogue dimension D₂: ≈ 57.1 mm
  • Catalogue dimension dₐ min.: 39 mm
  • Catalogue dimension Dₐ max.: 62 mm
  • Catalogue dimension rₐ max.: 1.5 mm
  • Bore diameter d (in): 1.2500 in
  • Outside diameter D (in): 2.7500 in
  • Width B (in): 0.6875 in

The cylindrical bore d 31.75 mm fits the shaft seat, outer diameter D 69.85 mm fits the housing bore, and B 17.462 mm is the axial width. The same variant has a catalogue r₁,₂ min. dimension of 1.6 mm. When designing shoulders, distinguish this bearing dimension from the permissible corner radius of the mating part.

RLS 10 belongs to an inch-size series. The SKF dimension table lists nominal values d 1.2500 in, D 2.7500 in and B 0.6875 in. When selecting a replacement, distinguish inch sizing from metric series and use the precise catalogue dimensions rather than rounding to whole millimetres.

Lubrication and operation

The open design allows lubricant from the surrounding arrangement to reach the raceways. The assembly must provide contamination protection and lubrication suited to its speed, temperature and load. An open construction does not specify the type or quantity of lubricant supplied.

Reference speed is based on thermal conditions, while limiting speed reflects mechanical constraints. These are separate catalogue ratings; actual operating speed must be assessed with the lubrication, load and cooling conditions of the particular assembly.

Mounting and replacement selection

Clean the shaft and housing seats before mounting. Apply fitting force through the ring mounted with an interference fit, never through the balls.

SKF

Additional parameters

Category: Single row ball bearings
Weight: 0.31 kg
EAN: 7316577017734
Designation: RLS 10 SKF
Type: Single-row deep groove ball bearing
Bore diameter d: 31.75 mm
Outside diameter D: 69.85 mm
Width B: 17.462 mm
Closure: Open, without shields or seals
Basic dynamic load rating C: 22.5 kN
Basic static load rating C₀: 13.2 kN
Fatigue load limit Pᵤ: 0.55 kN
Reference speed: 20000 r/min
Limiting speed: 14000 r/min
Catalogue bearing mass: 0.3 kg
Catalogue dimension r₁,₂ min.: 1.6 mm
Catalogue dimension d₁: ≈ 42.3 mm
Catalogue dimension D₂: ≈ 57.1 mm
Catalogue dimension dₐ min.: 39 mm
Catalogue dimension Dₐ max.: 62 mm
Catalogue dimension rₐ max.: 1.5 mm
Bore diameter d (in): 1.2500 in
Outside diameter D (in): 2.7500 in
Width B (in): 0.6875 in

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any SKF product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about SKF products

SKF – Product range and selection

The SKF range includes, for example: ball bearings, cylindrical and spherical roller bearings, seals, lubrication systems.

Examples from our catalogue

  • S 7014 CDGA P4A SKF
  • 6303 2RSH SKF
  • 22234 CC/W33 SKF

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.

Choose SKF bearings by the full designation and the requirements of the bearing arrangement. Preserve every suffix when searching for an exact item.

Check the details behind the designation

Compare bearing type, bore, outside diameter and width, followed by the specified clearance, sealing and precision. For a housing component or bushing, also identify the assembly and mounting.

What should a quotation request include?

Send the full designation, quantity and application. If the marking is incomplete, include dimensions and photographs of both sides. Availability and any replacement will be checked for the specific item.

Request a SKF quotation · Select bearings by designation or size

Availability and any replacement will be confirmed for the specific item.

Manufacturing company : AB SKF (publ)
Address : Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden
E-mail : skf.cz@skf.com