Bearing - NX 10 Z XL INA
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
NX 10 Z XL INA combines a radial needle roller bearing with an axial deep groove ball bearing. This X-life design has no inner ring and supports radial forces and axial force in one direction.
Technical data
- Designation: NX 10 Z XL INA
- Type: Combined needle roller and axial ball bearing
- Fw: 10 mm
- D: 19 mm
- C: 18 mm
- C1: 4.7 mm
- dw: 10 mm
- r min.: 0.3 mm
- C2: 10 mm
- D1: 21.9 mm
- da: 14.6 mm
- ra max.: 0.3 mm
- Radial dynamic load rating Cr: 6 kN
- Radial static load rating C0r: 4.65 kN
- Axial dynamic load rating Ca: 4.6 kN
- Axial static load rating C0a: 7.2 kN
Construction and lubrication
The axial component has a full complement of balls. Z identifies an end cap without oil lubrication holes and the grease-lubricated version. The axial component is greased with lithium complex soap grease to DIN 51825–KP2N–20. The outer ring has a lubrication groove and hole. XL denotes the X-life design; it is not an additional seal.
Mounting and raceway
Fw is the needle roller raceway diameter, not the bore of a supplied inner ring. The needles can run directly on a hardened and ground shaft raceway. If the shaft cannot provide a suitable raceway, the catalogue recommends the separately ordered IR6X10X10 inner ring. This changes the shaft interface, so Fw must not automatically be treated as the shaft diameter when that ring is used.
Distinguish radial from axial load ratings when designing the arrangement. The axial component supports force in only one direction, determining the bearing orientation. Basic dynamic and static load ratings are not recommended operating loads. Dimensions C1, C2, D1, da and ra concern adjoining parts and must be read with the catalogue drawing.
Additional parameters
| Category: | Combined bearings |
|---|---|
| Weight: | 0.025 kg |
| EAN: | 4012802735765 |
| Designation: | NX 10 Z XL INA |
| Type: | Combined needle roller and axial ball bearing |
| Fw: | 10 mm |
| D: | 19 mm |
| C: | 18 mm |
| C1: | 4.7 mm |
| dw: | 10 mm |
| r min.: | 0.3 mm |
| C2: | 10 mm |
| D1: | 21.9 mm |
| da: | 14.6 mm |
| ra max.: | 0.3 mm |
| Radial dynamic load rating Cr: | 6 kN |
| Radial static load rating C0r: | 4.65 kN |
| Axial dynamic load rating Ca: | 4.6 kN |
| Axial static load rating C0a: | 7.2 kN |
Product rating
Be the first who will post an article to this item!
We can source almost any INA product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about INA productsINA – Product range and selection
The INA range includes, for example: needle roller bearings, linear guides, bearing units.
Examples from our catalogue
- ZKLF 2575 2RS 2AP INA
- GS 81106 INA
- TTUE40-XL INA
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Select INA bearings and linear components by their full designation. First identify whether you need a bearing, linear bushing or another part of the assembly.
Compare function and mounting
For a bearing, check the construction and dimensions. For a linear bushing, include the guide shaft diameter, housing dimensions and mounting arrangement. Preserve all suffixes and send a photograph of the assembly if unclear.
Can I replace a part using dimensions alone?
The same dimensions can belong to different designs. Compare mounting, seals, precision and application requirements before selecting a replacement. Include the original marking and the quantity required.
Request a INA quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Schaeffler Technologies AG & Co. KG |
|---|---|
| Address : | Industriestraße 1–3, 91074 Herzogenaurach, Germany |
| E-mail : | info@schaeffler.com |