Bearing - 22209 EK SKF
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
22209 EK SKF is a double-row spherical roller bearing for radial loads and axial forces in both directions. Its spherical outer-ring raceway accommodates misalignment and shaft deflection.
Technical data
- Designation: 22209 EK SKF
- Dimensions d × D × B: 45 × 85 × 23 mm
- Double-row spherical roller bearing
Design and designation
E identifies the optimized internal design; K indicates a tapered bore with a 1:12 taper. The bearing is open, with normal CN radial clearance and provisions for lubricant supply.
Choosing the correct variant
The K tapered bore determines the mounting method: this variant is not identical to 22209 E with a cylindrical bore. Depending on the design, it may mount on a tapered journal or with a suitable sleeve. The sleeve, nut and locking parts must match the assembly; the bearing designation does not automatically include them.
Normal CN clearance is the initial condition before mounting. Driving the bearing up a taper expands the inner ring and reduces radial clearance, so do not use a universal number of nut turns without measurement and the prescribed procedure. A C3 variant has a different initial clearance and is not an automatic substitute for CN. Self-alignment helps accommodate operating misalignment but does not replace correct seat geometry or permit unlimited angular displacement.
Mounting and use
When mounting on a tapered seat, check the reduction in radial clearance or axial displacement using the SKF procedure. The nominal 45 mm bore alone does not establish shaft diameter when a sleeve is used.
The open design has no integral contact seals; the surrounding assembly must protect it from dust and moisture. Supply clean lubricant and keep lubrication paths clear. Lubricant quantity and relubrication intervals depend on operating conditions. Do not pass mounting force through the rollers, and verify the achieved clearance and secure locking after positioning. For replacement, compare the complete 22209 EK designation as well as the principal dimensions.
Practical questions
Does self-alignment remove the need for accurate mounting?
No. The spherical raceway allows the inner assembly to adjust its position, but correct ring seats, supporting shoulders and axial locking remain necessary. Permissible misalignment depends on load, surrounding components and seals; it is not established simply by the bearing type name.
What information is useful for a replacement?
Provide speed, force directions and magnitudes, temperature, lubrication method and whether the bearing mounts on a tapered journal or a sleeve. Include the sleeve and locking-part designations. These details help assess mounting compatibility and the required final clearance while distinguishing the tapered-bore version from a cylindrical-bore bearing.
Additional parameters
| Category: | Radial spherical roller bearingsBearings 45 × 85 × 23 mm |
|---|---|
| Weight: | 0.58 kg |
| EAN: | 7316572048580 |
| Inner diameter d (mm): | 45 |
| Outer diameter D (mm): | 85 |
| Width (mm): | 23 |
Product rating
Be the first who will post an article to this item!
We can source almost any SKF product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about SKF productsSKF – Product range and selection
The SKF range includes, for example: ball bearings, cylindrical and spherical roller bearings, seals, lubrication systems.
Examples from our catalogue
- S 7014 CDGA P4A SKF
- 6303 2RSH SKF
- 22234 CC/W33 SKF
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Choose SKF bearings by the full designation and the requirements of the bearing arrangement. Preserve every suffix when searching for an exact item.
Check the details behind the designation
Compare bearing type, bore, outside diameter and width, followed by the specified clearance, sealing and precision. For a housing component or bushing, also identify the assembly and mounting.
What should a quotation request include?
Send the full designation, quantity and application. If the marking is incomplete, include dimensions and photographs of both sides. Availability and any replacement will be checked for the specific item.
Request a SKF quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | AB SKF (publ) |
|---|---|
| Address : | Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden |
| E-mail : | skf.cz@skf.com |