Bearing - UC 205 CRAFT
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
Bearing - UC 205 CRAFT
UC 205 CRAFT insert bearing
A UC-series insert is based on a single-row ball bearing but has an extended inner ring, two-grub-screw shaft locking and a spherical outside surface. When fitted in a suitable housing, it can compensate for small initial alignment errors between the shaft and housing during installation.
Key features
- Dimensions: 25 mm bore, 52 mm outside diameter and 34.1 mm overall width.
- Design: ball-bearing insert with a spherical outside surface.
- Shaft locking: two grub screws in the inner ring.
- Configuration: sealed and grease-filled.
- Brand: CRAFT.
Applications
Typical uses include conveyors, fans, packaging machines, agricultural equipment and drives requiring straightforward shaft mounting. The bearing primarily carries radial loads and can support moderate axial forces in both directions.
Selection and mounting
This product is the bearing insert only; order the housing separately and verify compatibility with the UC 205 size series. The spherical surface permits one-time alignment during mounting and is not intended for continuous oscillating misalignment. Clean the shaft before installation, seat the insert correctly and tighten the grub screws alternately to the specified torque. Verify the complete designation UC 205 CRAFT.
Additional parameters
| Category: | Insert ball bearingsBearings 25 × 52 × 34.1 mm |
|---|---|
| Weight: | 0.2 kg |
| Inner diameter d (mm): | 25 |
| Outer diameter D (mm): | 52 |
| Width (mm): | 34.1 |
Product rating
Be the first who will post an article to this item!
We can source almost any CRAFT product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about CRAFT productsCRAFT – Product range and selection
We can help identify the required version of a CRAFT product from the complete designation and available documentation.
Examples from our catalogue
- P 207 CRAFT
- UC 205 CRAFT
- UCP 207 CRAFT
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.