Bearing - UC 207 DKF
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
Bearing - UC 207 DKF
UC 207 DKF insert bearing
A UC-series insert is based on a single-row ball bearing but has an extended inner ring, two-grub-screw shaft locking and a spherical outside surface. When fitted in a suitable housing, it can compensate for small initial alignment errors between the shaft and housing during installation.
Key features
- Dimensions: 35 mm bore, 72 mm outside diameter and 42.9 mm overall width.
- Design: ball-bearing insert with a spherical outside surface.
- Shaft locking: two grub screws in the inner ring.
- Configuration: sealed and grease-filled.
- Brand: DKF.
Applications
Typical uses include conveyors, fans, packaging machines, agricultural equipment and drives requiring straightforward shaft mounting. The bearing primarily carries radial loads and can support moderate axial forces in both directions.
Selection and mounting
This product is the bearing insert only; order the housing separately and verify compatibility with the UC 207 size series. The spherical surface permits one-time alignment during mounting and is not intended for continuous oscillating misalignment. Clean the shaft before installation, seat the insert correctly and tighten the grub screws alternately to the specified torque. Verify the complete designation UC 207 DKF.
Additional parameters
| Category: | Insert ball bearingsBearings 35 × 72 × 42.9 mm |
|---|---|
| Weight: | 0.46 kg |
| Inner diameter d (mm): | 35 |
| Outer diameter D (mm): | 72 |
| Width (mm): | 42.9 |
Product rating
Be the first who will post an article to this item!
We can source almost any DKF product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about DKF productsDKF – Product range and selection
We can help identify the required version of a DKF product from the complete designation and available documentation.
Examples from our catalogue
- 6209 K 2RS C3 DKF
- 16015 DKF
- NU 2311 DKF
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Looking for a DKF bearing replacement? Start with the full marking and the bearing's construction, then compare its dimensions and the requirements of the machine.
Keep the original marking complete
A basic reference such as 626 or 1203 identifies a different product; a matching bore alone does not establish a suitable replacement. Include every suffix shown on the bearing or packaging. If you need another brand, the technical specification must be checked before a substitute is confirmed.
Products in this range
Request a DKF quotation · Bearings by designation and dimensions
Please specify the quantity required. Availability and any replacement will be confirmed for the exact item.
| Manufacturing company : | DKF Deutsche Kugellagerfabriken GmbH |
|---|---|
| Address : | Rosenthaler Straße 40/41, 10178 Berlin, Germany |
| E-mail : | mail@dkf-group.de |