Bearing sleeve - AH 2313 ZKL

Not rated Rating details
€24,48 / pcs €20,23 excl. VAT Measure price:
In stock (4 pcs)
Delivery to:
24. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€24,48 / pcs
5 - 9 pcs = discount 3 %
€23,75 / pcs
10 - 24 pcs = discount 6 %
€23,01 / pcs
25 - 49 pcs = discount 9 %
€22,28 / pcs
50 and more pcs = discount 12 %
€21,54 / pcs
You save €0

Withdrawal sleeve AH 2313 ZKL. Shaft diameter d₀: 60 mm; length l: 61 mm; thread d_z: M75 × 2.

Detailed information

Product detailed description

ZKL AH 2313 is a steel withdrawal sleeve for mounting a tapered-bore bearing on a cylindrical stepped shaft. It is intended for a shaft diameter of 60 mm and has a length l of 61 mm.

Technical data

  • Shaft diameter d₀: 60 mm
  • Catalogue dimension d: 65 mm
  • Thread d_z: M75 × 2
  • Length l: 61 mm
  • Dimension l₁: 64 mm
  • h: 11 mm
  • z: 7 mm
  • Material: steel
  • Withdrawal nut: KM15

Dimensions of this version

For AH 2313 ZKL, shaft diameter d₀ is 60 mm and catalogue dimension d of the tapered section is 65 mm. Do not confuse this with the shaft diameter or thread d_z M75 × 2. The thread designation includes a nominal diameter of 75 mm and a 2 mm pitch. The drawing also distinguishes length l 61 mm from dimension l₁ 64 mm, measured between different surfaces. Auxiliary dimensions are h 11 mm and z 7 mm. The manufacturer lists withdrawal nut KM15 for this version, ordered separately. Compare these dimensions and the thread rather than relying on the basic number 2313 alone.

How the sleeve works

The tapered outside surface is driven into the bearing inner ring’s tapered bore, while the sleeve bore fits over a cylindrical shaft. The bearing needs suitable axial support, such as a shoulder or an appropriate spacer ring. The sleeve forms a mounting connection between shaft and bearing; it is neither a plain bushing nor a separate rolling bearing.

Difference from an adapter sleeve

Withdrawal and adapter sleeves differ in construction and in how their threads are used. A withdrawal sleeve has its thread at the larger end of the taper. A matching shaft diameter therefore does not make it interchangeable with an H-series adapter sleeve. Preserve the intended function of the complete arrangement when selecting a replacement.

Mounting and clearance checks

Before mounting, inspect the shaft, tapered surface and bearing bore and remove contamination. Prepare the contact surfaces and choose the mounting force according to the instructions for the particular bearing. Driving in the sleeve changes bearing radial clearance, so check the final setting by the specified clearance or axial displacement measurement. A universal tightening torque or number of nut turns cannot be established from the sleeve designation alone.

Dismounting and axial retention

A withdrawal nut releases the mounting connection during dismounting. Do not confuse its role with the assembly’s operating retention. ZKL describes axial retention of a withdrawal sleeve using an end plate or locknut; the particular arrangement must match the machine design and the support for the bearing inner ring.

Supply and accessory selection

ZKL supplies withdrawal sleeves without locknuts or washers. Required accessories are ordered separately. When replacing, check the complete bearing, sleeve and locking-part designations, the thread and space for tools. Assess load capacity, speed and lubrication for the whole bearing arrangement rather than the sleeve alone.

Additional parameters

Category: Withdrawal sleeves
Weight: 0.395 kg
Designation: AH 2313 ZKL
Type: Withdrawal sleeve
Shaft diameter d₀: 60 mm
Nominal tapered bearing bore diameter d: 65 mm
Thread d_z: M75×2
Length l: 61 mm
Dimension l₁: 64 mm
h: 11 mm
z: 7 mm
Material: steel
Withdrawal nut: KM15 (ordered separately)

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any ZKL product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about ZKL products

ZKL – Product range and selection

The ZKL range includes, for example: ball bearings.

Examples from our catalogue

  • B7016 AATB P5 OL ZKL
  • 22206 EJA ZKL
  • UCP212-36 ZKL

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.

Manufacturing company : ZKL, a.s.
Address : Jedovnická 2346/8, 628 00 Brno, Czech Republic
E-mail : head@zkl.cz