Bearing sleeve - AH 320 KOYO

Not rated Rating details
€24,48 / pcs €20,23 excl. VAT Measure price:
In stock (3 pcs)
Delivery to:
24. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€24,48 / pcs
5 - 9 pcs = discount 3 %
€23,75 / pcs
10 - 24 pcs = discount 6 %
€23,01 / pcs
25 - 49 pcs = discount 9 %
€22,28 / pcs
50 and more pcs = discount 12 %
€21,54 / pcs
You save €0

AH 320 KOYO: A withdrawal sleeve for securing a tapered-bore bearing on a cylindrical shaft. It is a bearing-mounting component, not a plain bushing in which the shaft rotates.

Detailed information

Product detailed description

AH 320 KOYO: A withdrawal sleeve for securing a tapered-bore bearing on a cylindrical shaft. It is a bearing-mounting component, not a plain bushing in which the shaft rotates.

Product identification

  • Designation: AH 320
  • Manufacturer: KOYO
  • Component type: Withdrawal sleeve

Selecting the bearing and adjacent parts

The sleeve must match the tapered bearing bore, shaft seating length and axial retention of the assembly. Shaft diameter, bearing bore and sleeve length are different dimensions and must not be confused. The basic number alone is insufficient. To select a replacement, compare the complete bearing and sleeve designations and the available mounting documentation.

Exact version identification

This item is offered as AH 320 KOYO. Do not automatically treat AH 320 and AHX 320 as identical: an additional letter may distinguish a dimensional version. Before selecting a nut or bearing, compare the marking, actual thread and dimensions of the original part. Similar appearance or a similar trade designation does not establish interchangeability.

Mounting and dismounting

The bearing must have a matching tapered bore and be supported against a fixed shaft shoulder during mounting. The sleeve is then driven into the bearing bore. The drive-up determines the fit and affects bearing internal clearance; it must not be replaced by arbitrary tightening or an estimate based on force. Follow the procedure specified for the bearing.

Checks before inserting the sleeve

Check the condition and cleanliness of the tapered and cylindrical seats, an undamaged thread and a clear longitudinal slit. Confirm in advance that the arrangement permits access to the dismounting nut and removal of the sleeve during future maintenance. Check bearing clearance by the method prescribed by the bearing manufacturer; a tight fit alone does not prove correct mounting.

Servicing and remounting

During dismounting, also inspect the shaft and bearing seats. A new sleeve does not repair a damaged seating surface or a worn bearing. Restore the specified axial retention when reassembling. Load capacity, operating speed and lubrication of the complete arrangement depend on the selected bearing and service conditions, not on the sleeve alone.

Common questions

Is AH 320 the same as an H-series adapter sleeve?

No. AH 320 is a withdrawal sleeve with a different mounting and dismounting arrangement. The same shaft diameter does not establish interchangeability with an H-series sleeve.

Can it be used with a cylindrical-bore bearing?

That is not the intended combination. The bearing taper, sleeve taper, length and adjacent retaining components must match.

Manufacturer technical documentation: KOYO

Additional parameters

Category: Withdrawal sleeves
Weight: 0.582 kg

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any KOYO product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about KOYO products

KOYO – Product range and selection

The KOYO range includes, for example: ball bearings, cylindrical and spherical roller bearings.

Examples from our catalogue

  • 63/22 2RS C3 KOYO
  • 7312 B KOYO
  • XF085-1 KOYO

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.

Select a KOYO bearing by its complete designation. Preserve every suffix and compare the construction as well as the dimensions before ordering.

Check the bearing design first

Distinguish ball, roller and needle bearing designs before comparing bore, outside diameter and width. Include the marking from both rings where available and tell us how the bearing is used.

Are similar numbers interchangeable?

A matching basic number or size is only a starting point. Compare the design, clearance, seals, precision and application requirements. Send photographs if the old marking is incomplete.

Request a KOYO quotation · Select bearings by designation or size

Availability and any replacement will be confirmed for the specific item.

Manufacturing company : JTEKT Europe Bearings B.V.
Address : Markerkant 13-01, 1314 AL Almere, The Netherlands
E-mail : info-eu@jtekt.eu