Bearing sleeve - AH 320 ZKL
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
AH 320 ZKL: A withdrawal sleeve for securing a tapered-bore bearing on a cylindrical shaft. It is a bearing-mounting component, not a plain bushing in which the shaft rotates.
Product identification
- Designation: AH 320
- Manufacturer: ZKL
- Component type: Withdrawal sleeve
Selecting the bearing and adjacent parts
The sleeve must match the tapered bearing bore, shaft seating length and axial retention of the assembly. Shaft diameter, bearing bore and sleeve length are different dimensions and must not be confused. The basic number alone is insufficient. To select a replacement, compare the complete bearing and sleeve designations and the available mounting documentation.
Exact version identification
This item is offered as AH 320 ZKL. Do not automatically treat AH 320 and AH 320 X as identical: an additional letter may distinguish a dimensional version. Before selecting a nut or bearing, compare the marking, actual thread and dimensions of the original part. Similar appearance or a similar trade designation does not establish interchangeability.
Mounting and dismounting
The bearing must have a matching tapered bore and be supported against a fixed shaft shoulder during mounting. The sleeve is then driven into the bearing bore. The drive-up determines the fit and affects bearing internal clearance; it must not be replaced by arbitrary tightening or an estimate based on force. Follow the procedure specified for the bearing.
Checks before inserting the sleeve
Check the condition and cleanliness of the tapered and cylindrical seats, an undamaged thread and a clear longitudinal slit. Confirm in advance that the arrangement permits access to the dismounting nut and removal of the sleeve during future maintenance. Check bearing clearance by the method prescribed by the bearing manufacturer; a tight fit alone does not prove correct mounting.
Servicing and remounting
During dismounting, also inspect the shaft and bearing seats. A new sleeve does not repair a damaged seating surface or a worn bearing. Restore the specified axial retention when reassembling. Load capacity, operating speed and lubrication of the complete arrangement depend on the selected bearing and service conditions, not on the sleeve alone.
Common questions
Is AH 320 the same as an H-series adapter sleeve?
No. AH 320 is a withdrawal sleeve with a different mounting and dismounting arrangement. The same shaft diameter does not establish interchangeability with an H-series sleeve.
Can it be used with a cylindrical-bore bearing?
That is not the intended combination. The bearing taper, sleeve taper, length and adjacent retaining components must match.
Additional parameters
| Category: | Withdrawal sleeves |
|---|---|
| Weight: | 0.582 kg |
Product rating
Be the first who will post an article to this item!
We can source almost any ZKL product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about ZKL productsZKL – Product range and selection
The ZKL range includes, for example: ball bearings.
Examples from our catalogue
- B7016 AATB P5 OL ZKL
- 22206 EJA ZKL
- UCP212-36 ZKL
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
| Manufacturing company : | ZKL, a.s. |
|---|---|
| Address : | Jedovnická 2346/8, 628 00 Brno, Czech Republic |
| E-mail : | head@zkl.cz |