Bearing sleeve - AHX 2318 ZKL

Not rated Rating details
€20,37 / pcs €16,83 excl. VAT Measure price:
In stock (1 pcs)
Delivery to:
24. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€20,37 / pcs
5 - 9 pcs = discount 3 %
€19,76 / pcs
10 - 24 pcs = discount 6 %
€19,15 / pcs
25 - 49 pcs = discount 9 %
€18,54 / pcs
50 and more pcs = discount 12 %
€17,93 / pcs
You save €0

AHX 2318 ZKL: A withdrawal sleeve for securing a tapered-bore bearing on a cylindrical shaft. It is a bearing-mounting component, not a plain bushing in which the shaft rotates.

Detailed information

Product detailed description

AHX 2318 ZKL: A withdrawal sleeve for securing a tapered-bore bearing on a cylindrical shaft. It is a bearing-mounting component, not a plain bushing in which the shaft rotates.

Product identification

  • Designation: AHX 2318
  • Manufacturer: ZKL
  • Component type: Withdrawal sleeve

Selecting the bearing and adjacent parts

The sleeve must match the tapered bearing bore, shaft seating length and axial retention of the assembly. Shaft diameter, bearing bore and sleeve length are different dimensions and must not be confused. The basic number alone is insufficient. To select a replacement, compare the complete bearing and sleeve designations and the available mounting documentation.

AHX 2300 series design

The ZKL technical overview specifies an external 1:12 taper and steel construction for AHX 2300 withdrawal sleeves. The longitudinal slit allows the sleeve to conform when clamped between the shaft and tapered bearing bore. It is not a lubricating or plain-bearing liner. Sleeve and bearing tapers must match; selecting a part by a similar outside diameter alone does not establish the required fit.

  • Material: Steel
  • Taper: 1:12

Exact version identification

This item is offered as AHX 2318 ZKL. ZKL documentation also uses AH 2318 X; when selecting a replacement, compare the full marking and drawing of the particular part. Another manufacturer’s dimensions or an approximately matching trade designation are insufficient to select a nut or establish interchangeability. The actual thread, length and mounting dimensions matter.

Mounting and dismounting

The bearing must have a matching tapered bore and be supported against a fixed shaft shoulder during mounting. The sleeve is then driven into the bearing bore. The drive-up determines the fit and affects bearing internal clearance; it must not be replaced by arbitrary tightening or an estimate based on force. Follow the procedure specified for the bearing.

Checks before inserting the sleeve

Check the condition and cleanliness of the tapered and cylindrical seats, an undamaged thread and a clear longitudinal slit. Confirm in advance that the arrangement permits access to the dismounting nut and removal of the sleeve during future maintenance. Check bearing clearance by the method prescribed by the bearing manufacturer; a tight fit alone does not prove correct mounting.

Servicing and remounting

During dismounting, also inspect the shaft and bearing seats. A new sleeve does not repair a damaged seating surface or a worn bearing. Restore the specified axial retention when reassembling. Load capacity, operating speed and lubrication of the complete arrangement depend on the selected bearing and service conditions, not on the sleeve alone.

Common questions

Is AHX 2318 the same as an H-series adapter sleeve?

No. AHX 2318 is a withdrawal sleeve with a different mounting and dismounting arrangement. The same shaft diameter does not establish interchangeability with an H-series sleeve.

Can it be used with a cylindrical-bore bearing?

That is not the intended combination. The bearing taper, sleeve taper, length and adjacent retaining components must match.

Manufacturer technical documentation: ZKL

Additional parameters

Category: Withdrawal sleeves
Weight: 0.845 kg
Component type: Withdrawal sleeve
Material: Steel
Taper: 1:12

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any ZKL product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about ZKL products

ZKL – Product range and selection

The ZKL range includes, for example: ball bearings.

Examples from our catalogue

  • B7016 AATB P5 OL ZKL
  • 22206 EJA ZKL
  • UCP212-36 ZKL

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.

Manufacturing company : ZKL, a.s.
Address : Jedovnická 2346/8, 628 00 Brno, Czech Republic
E-mail : head@zkl.cz