Bearing sleeve - AHX 2320 KOYO
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
AHX 2320 KOYO is a longitudinally slit withdrawal sleeve with a 1:12 taper. It fits between the cylindrical shaft seat and the tapered bearing bore. Driving the sleeve into the bore creates the required tight fit; the sleeve is not a plain bearing or a running surface for a rotating journal.
Dimensions and design
- Shaft diameter d1: 95 mm
- Nominal bearing bore d: 100 mm
- Catalogue dimension B1: 90 mm
- Thread G: M110 × 2
- Taper: 1:12
- Thread length G1: 16 mm
- Catalogue dimension B2: 94 mm
- Nut listed in the catalogue: AN22
- Catalogue combination: 22320RZK + AHX 2320
Distinguishing the diameters and length
Dimension d1 = 95 mm refers to the cylindrical shaft, whereas d = 100 mm is the nominal size of the tapered bearing bore. They are not two alternative sizes for the same hole. B1 = 90 mm is a sleeve drawing dimension and must not be confused with bearing width. M110 × 2 specifies the external sleeve thread, not the shaft size.
The catalogue specifies bearing 22320RZK together with sleeve AHX 2320. This does not establish interchangeability with every bearing having the basic number 22320; retain the manufacturer and complete version designation. B1 = 90 mm is the sleeve length, whereas B2 = 94 mm is a different assembly dimension shown in the drawing. Thread length G1 is 16 mm.
Selecting the accessories
The KOYO catalogue lists nut AN22 for AHX 2320. When selecting the tool and nut, check the M110 × 2 thread and their mounting or dismounting function. The nut designation is not a shaft diameter. Axial retention of the complete assembly must suit the shaft design and the prescribed bearing procedure.
Mounting and dismounting
The bearing must have a matching tapered bore and be supported against a fixed shaft shoulder during mounting. The sleeve is then driven into the bearing bore. The drive-up determines the fit and affects bearing internal clearance; it must not be replaced by arbitrary tightening or an estimate based on force. Follow the procedure specified for the bearing.
Checks before inserting the sleeve
Check the condition and cleanliness of the tapered and cylindrical seats, an undamaged thread and a clear longitudinal slit. Confirm in advance that the arrangement permits access to the dismounting nut and removal of the sleeve during future maintenance. Check bearing clearance by the method prescribed by the bearing manufacturer; a tight fit alone does not prove correct mounting.
Common questions
Is AHX 2320 the same as an H-series adapter sleeve?
No. AHX 2320 is a withdrawal sleeve with a different mounting and dismounting arrangement. The same shaft diameter does not establish interchangeability with an H-series sleeve.
Can it be used with a cylindrical-bore bearing?
That is not the intended combination. The bearing taper, sleeve taper, length and adjacent retaining components must match.
Additional parameters
| Category: | Withdrawal sleeves |
|---|---|
| Weight: | 1 kg |
| Component type: | Withdrawal sleeve |
| Shaft diameter d1: | 95 mm |
| Nominal bearing bore d: | 100 mm |
| Catalogue dimension B1: | 90 mm |
| Thread G: | M110 × 2 |
| Taper: | 1:12 |
| Thread length G1: | 16 mm |
| Catalogue dimension B2: | 94 mm |
| Nut listed in the catalogue: | AN22 |
| Catalogue combination: | 22320RZK + AHX 2320 |
Product rating
Be the first who will post an article to this item!
We can source almost any KOYO product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about KOYO productsKOYO – Product range and selection
The KOYO range includes, for example: ball bearings, cylindrical and spherical roller bearings.
Examples from our catalogue
- 63/22 2RS C3 KOYO
- 7312 B KOYO
- XF085-1 KOYO
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Select a KOYO bearing by its complete designation. Preserve every suffix and compare the construction as well as the dimensions before ordering.
Check the bearing design first
Distinguish ball, roller and needle bearing designs before comparing bore, outside diameter and width. Include the marking from both rings where available and tell us how the bearing is used.
Are similar numbers interchangeable?
A matching basic number or size is only a starting point. Compare the design, clearance, seals, precision and application requirements. Send photographs if the old marking is incomplete.
Request a KOYO quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | JTEKT Europe Bearings B.V. |
|---|---|
| Address : | Markerkant 13-01, 1314 AL Almere, The Netherlands |
| E-mail : | info-eu@jtekt.eu |