Bearing sleeve - AOH 24084 SKF

Not rated Rating details
€531,22 / pcs €439,02 excl. VAT Measure price:
Available to order – we will confirm availability
Delivery to:
30. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€531,22 / pcs
5 - 9 pcs = discount 3 %
€515,28 / pcs
10 - 24 pcs = discount 6 %
€499,35 / pcs
25 - 49 pcs = discount 9 %
€483,41 / pcs
50 and more pcs = discount 12 %
€467,47 / pcs
You save €0

AOH 24084 SKF oil-injection withdrawal sleeve for a 400 mm shaft and 420 mm tapered bearing bore. Width B₁ 230 mm, Tr440×5 thread, 1:30 taper.

Detailed information

Product detailed description

AOH 24084 SKF oil-injection withdrawal sleeve for a 400 mm shaft and 420 mm tapered bearing bore. Width B₁ 230 mm, Tr440×5 thread, 1:30 taper.

Technical data

  • Designation: AOH 24084 SKF
  • Shaft diameter d₁: 400 mm
  • Nominal bearing bore d: 420 mm
  • Length B₁: 230 mm
  • Width before drive-up B₂: 252 mm
  • Thread G: Tr440×5
  • Thread length G₁: 30 mm
  • Oil-supply connection thread G₂: G 1/4
  • Bore–oil supply duct distance A: 9 mm
  • Taper: 1:30
  • Approximate mass: 29 kg
  • Associated withdrawal nut: HM3188
  • Hydraulic nut: HMV88E
  • Example of associated SKF bearing: 24084 ECAK30/W33

Function in the bearing arrangement

The sleeve is driven between the cylindrical shaft seat and the bearing's tapered bore. Axial movement along the taper produces the necessary grip and also affects the bearing's radial internal clearance. Do not select a sleeve solely by its largest diameter or appearance. Bearing compatibility, supporting shoulders and axial retention of the complete assembly all matter.

The AOH design has two oil-supply ducts at the threaded end and distribution grooves on both the outside surface and in the sleeve bore. Pressurized oil assists mounting and dismounting by reducing friction between mating surfaces. This is not continuous lubrication of the rolling elements. Oil injection requires appropriate pressure equipment for both supplies; SKF describes two hydraulic pumps or injectors with suitable connecting pipes.

Exact variant

Shaft diameter d₁ 400 mm differs from the outside diameter at the small taper end d 420 mm. Sleeve width B₁ is 230 mm; B₂ 252 mm is the width of sleeve and bearing before drive-up. Thread G is trapezoidal Tr440×5 and thread length G₁ is 30 mm. The oil-supply connection is G₂ = G 1/4 with catalogue distance A of 9 mm. The 1:30 taper is essential for the corresponding bearing and must not be confused with 1:12.

Mounting and clearance checks

Before mounting, check the shaft, sleeve taper and bearing bore for cleanliness and damage. Inspect the thread and available access for mounting tools. Support the bearing correctly; mounting force must not pass through the rolling elements.

Required drive-up and final clearance are determined by the particular bearing and the manufacturer's mounting procedure. Do not use a universal tightening torque or number of nut turns instead of the specified check. Sleeve dimensions alone do not establish operating clearance or the permissible speed of the assembly.

Dismounting and associated parts

SKF lists removal nut HM3188 and hydraulic nut HMV88E. HM3188 here is not automatically the nut for final retention on the shaft. Select retention according to the assembly, using an appropriate nut or end plate; nuts and locking parts are ordered separately. Oil injection beneath the mating surfaces and hydraulic-nut operation are different functions. Follow SKF dismounting instructions, including the prescribed restraint against sudden sleeve release.

Replacement checks

For replacement, compare sleeve and bearing designations, shaft diameter, thread, both catalogue lengths and axial retention. Provide an assembly sketch where shoulders or access differ. Bearing lubrication and contamination protection remain functions of the complete arrangement; the sleeve itself is not a seal.

Additional parameters

Category: Withdrawal sleeves
Weight: 29 kg
Shaft diameter (mm): 400
Shaft diameter d₁: 400 mm
Nominal bearing bore d: 420 mm
Length B₁: 230 mm
Width before drive-up B₂: 252 mm
Thread G: Tr440×5
Thread length G₁: 30 mm
Oil-supply connection thread G₂: G 1/4
Bore–oil supply duct distance A: 9 mm
Taper: 1:30
Approximate mass: 29 kg
Associated withdrawal nut: HM3188
Hydraulic nut: HMV88E
Example of associated SKF bearing: 24084 ECAK30/W33

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any SKF product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about SKF products

SKF – Product range and selection

The SKF range includes, for example: ball bearings, cylindrical and spherical roller bearings, seals, lubrication systems.

Examples from our catalogue

  • S 7014 CDGA P4A SKF
  • 6303 2RSH SKF
  • 22234 CC/W33 SKF

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.

Choose SKF bearings by the full designation and the requirements of the bearing arrangement. Preserve every suffix when searching for an exact item.

Check the details behind the designation

Compare bearing type, bore, outside diameter and width, followed by the specified clearance, sealing and precision. For a housing component or bushing, also identify the assembly and mounting.

What should a quotation request include?

Send the full designation, quantity and application. If the marking is incomplete, include dimensions and photographs of both sides. Availability and any replacement will be checked for the specific item.

Request a SKF quotation · Select bearings by designation or size

Availability and any replacement will be confirmed for the specific item.

Manufacturing company : AB SKF (publ)
Address : Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden
E-mail : skf.cz@skf.com