Bearing sleeve - H 207 DPI
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
H 207 DPI is an adapter sleeve for mounting a tapered-bore bearing on a cylindrical shaft of 30 mm diameter. The sleeve length is 29 mm. It forms the mounting connection between the shaft and bearing inner ring.
Verified dimensions
- Shaft diameter d₁: 30 mm
- Nominal bearing bore d: 35 mm
- Sleeve length B₁: 29 mm
- Outside diameter over nut d₂: 52 mm
- Catalogue dimension b₂: 9 mm
Shaft diameter and nominal bearing bore are different dimensions. The cylindrical inside surface seats on the shaft; the external taper receives the bearing. The outside dimension over the nut is not the bearing outside diameter. Do not select a replacement from one dimension alone. Sleeve length is also different from bearing width.
How the adapter works
Tightening the locknut drives the bearing along the taper and clamps the sleeve onto the shaft. This is an H-series adapter sleeve; AH withdrawal sleeves use a different mounting arrangement and are not interchangeable simply because their bores match. The sleeve is not a plain bearing and contains no raceways or rolling elements.
Mounting and clearance checks
Clean the shaft and mating surfaces, inspect the thread and check the complete bearing designation, including its tapered-bore version. Drive-up affects internal bearing clearance, so verify the final setting by the method prescribed for that bearing. The sleeve designation alone does not determine a universal tightening torque or number of nut turns. Allow axial space for the nut and access for mounting tools.
Nut and locking
DPI lists self-aligning ball bearing 1207K with H207. This is a catalogue pairing, not a designation of an included bearing. When selecting the nut and its locking arrangement, compare the actual thread and assembly documentation. A catalogue assembly drawing alone does not establish the package contents of this item.
Maintenance and replacement
Before remounting, inspect taper, shaft seat, thread and locking components. Replacing the sleeve does not repair a worn shaft or damaged bearing inner ring. Lubricant, relubrication interval, speed and load capacity depend on the complete bearing arrangement. Bearing lubrication is separate from preparing the mounting contact surfaces. Complete the specified nut locking before operation.
Additional parameters
| Category: | Adapter sleeves |
|---|---|
| Weight: | 0.12 kg |
| Shaft diameter d₁: | 30 mm |
| Nominal bearing bore d: | 35 mm |
| Sleeve length B₁: | 29 mm |
| Outside diameter over nut d₂: | 52 mm |
| Catalogue dimension b₂: | 9 mm |
Product rating
Be the first who will post an article to this item!
We can source almost any DPI product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about DPI productsDPI – Product range and selection
We can help identify the required version of a DPI product from the complete designation and available documentation.
Examples from our catalogue
- 6208 DPI
- UC 207 DPI
- 6003 2Z DPI
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.