Bearing sleeve - H 3068 FAG
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
H 3068 FAG is an adapter sleeve for mounting a tapered-bore bearing on a cylindrical shaft of 320 mm diameter. The sleeve length is 187 mm. It forms the mounting connection between the shaft and bearing inner ring.
Verified dimensions
- Shaft diameter d₁: 320 mm
- Nominal bearing bore d: 340 mm
- Sleeve length l: 187 mm
- Outside diameter over nut Dm: 400 mm
- Sleeve material: Steel
Shaft diameter and nominal bearing bore are different dimensions. The cylindrical inside surface seats on the shaft; the external taper receives the bearing. The outside dimension over the nut is not the bearing outside diameter. Do not select a replacement from one dimension alone. Sleeve length is also different from bearing width.
When ordering, retain the full H30 series designation. An H31 sleeve for the same shaft diameter is not automatically a replacement; also check sleeve length, bearing position and the available mounting space in the assembly.
How the adapter works
Tightening the locknut drives the bearing along the taper and clamps the sleeve onto the shaft. This is an H-series adapter sleeve; AH withdrawal sleeves use a different mounting arrangement and are not interchangeable simply because their bores match. The sleeve is not a plain bearing and contains no raceways or rolling elements.
Mounting and clearance checks
Clean the shaft and mating surfaces, inspect the thread and check the complete bearing designation, including its tapered-bore version. Drive-up affects internal bearing clearance, so verify the final setting by the method prescribed for that bearing. The sleeve designation alone does not determine a universal tightening torque or number of nut turns. Allow axial space for the nut and access for mounting tools.
Nut and locking
The nut transmits the mounting force and must be secured with the appropriate locking device after correct adjustment. For replacement, check the exact nut, thread and locking arrangement on the particular sleeve; do not select these parts by shaft diameter alone. Complete locking after checking the mounting position and clearance. The bearing is a separate component.
Maintenance and replacement
Before remounting, inspect taper, shaft seat, thread and locking components. Replacing the sleeve does not repair a worn shaft or damaged bearing inner ring. Lubricant, relubrication interval, speed and load capacity depend on the complete bearing arrangement. Bearing lubrication is separate from preparing the mounting contact surfaces. Complete the specified nut locking before operation.
Additional parameters
| Category: | Adapter sleeves |
|---|---|
| Weight: | 28.5 kg |
| Shaft diameter d₁: | 320 mm |
| Nominal bearing bore d: | 340 mm |
| Sleeve length l: | 187 mm |
| Outside diameter over nut Dm: | 400 mm |
| Sleeve material: | Steel |
Product rating
Be the first who will post an article to this item!
We can source almost any FAG product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about FAG productsFAG – Product range and selection
The FAG range includes, for example: ball bearings, cylindrical and spherical roller bearings, tapered roller bearings.
Examples from our catalogue
- HCB 7006 CTP4SDUL FAG
- B7007 E 2RSD T P4S UL FAG
- UKP218-J7 FAG
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Choose FAG bearings by the complete designation, including suffixes. The required design and operating conditions matter alongside the bearing dimensions.
Compare the complete specification
Check bore, outside diameter, width, internal clearance and the specified shielding or sealing. For a replacement, include the machine application and a photograph of the original marking.
Is a dimensionally identical bearing enough?
Verify the complete specification before substituting a bearing. Different suffixes can identify different designs; a similar reference alone does not confirm suitability.
Request a FAG quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Schaeffler Technologies AG & Co. KG |
|---|---|
| Address : | Industriestraße 1–3, 91074 Herzogenaurach, Germany |
| E-mail : | info@schaeffler.com |